Shown on engine 906 |
1 | Threaded cap |
2 | Sealing ring |
3 | Filter element |
4 | Filter housing |
G47.20-3114-01
| Clean | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
Topical note | Notes on tilting the cab | ||
1 | Tilt cab | ||
| |||
2 | Open cap on fuel tank, relieve overpressure | ||
3 | Clean outside of soiled fuel prefilter | ||
4 | Unscrew screw cap (1) and pull out of filter housing (4) together with filter element (3) | Ensure that no foreign bodies enter the filter housing (4). Do not wipe the filter housing (4) under any circumstances. | |
5 | Clean screw cap (1) and filter element (3) | Replace filter element (3) if severely soiled or damaged. | |
6 | Replace seal (2) | Grease sealing ring (2) slightly. | |
7 | Screw on screw cap (1) with filter element (3) and tighten | Cover, fuel prefilter to fuel filter housing | |
8 | Start the engine and bleed the fuel system | | |
Run the engine for approx. 1 minute. The fuel system is bled automatically. | |||
9 | Run engine and inspect fuel prefilter for leaks | ||
10 | Turn off engine | | |
11 | Lower cab | ||
|