Tilt cab to repair position, tilt back

AR60.80-G-0010NA

Tilt cab to repair position, tilt back

26.04.2019

Model

405.210/230 with body 405.830

For USA/Canada only

Modification notes

11.02.2003

Info added and picture of safety strut changed

Step 4

1

Hydraulic pump

2

Selector lever

3

Safety strut

Tilt cab

 Warning

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut.

AS60.80-Z-0001-01A

Topical note

Notes on tilting the cab

AH60.80-N-0003-01B

1

Raise front-end flap and secure

 See Service Instructions

2

Move selector lever (2) of hydraulic pump (1) to "Lift" position


Pay attention to loose objects in cab.
Otherwise the windshield can be damaged.

 Move selector lever (2) to "Lower" position.

3

Install tool (SW 30) on hydraulic pump (1) and pump up cab

 The vehicle lock is unlocked by the hydraulic pump (1). Pump up cab to end stop.

 Actuate hydraulic pump (1) until cab is positioned forward to the front of the vehicle and a strong resistance is felt.

4

Install safety support (3) on piston rod

 Observe installation position of safety strut, see adhesive label.

5

Lower in reverse sequence

 Ensure sufficient unobstructed movement of lines, hoses, etc.