Shown on model 212.002 |
10 | Tie rod |
10f | Bellows |
10g | Tie rod joint |
10m | Boot |
P46.40-2079-11
| Check | ||
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer. | |
Danger ! | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of the mechanism when the components are moving. | |
1 | Turn key in ignition lock to position "0" | ||
2 | Raise vehicle using vehicle lift until the wheels are clear of the ground | ||
3 | Check boots (10m) and tie rod joint (10g) | Check boots (10m) for condition, leaktightness and correct seat. Check play of tie rod joint (10g) by pulling and pushing firmly on the tie rod (10). | |
In the event of complaints: | |||
| |||
Replace tie rod (10), subject to separate repair order. | |||
4 | Remove bottom engine compartment paneling | MODEL 231 | |
| |||
5 | Check boots (10f) | | |
Stretch bellows (10f) by turning steering to left and right wheel lock; check for cracks, indentations and chafing. | |||
In the case of cracks, indentations and chafe marks: | |||
| |||
Replace boot (10f), subject to separate repair order. | |||
6 | Install lower engine compartment paneling | MODEL 231 | |
| |||
7 | Lower vehicle |