Replace retarder oil separator

AP43.30-B-4382TG

Replace retarder oil separator

30.10.2019

Model

934.241/251, 938.14 with engine 457.9, 460.9

with code BA1 (Voith retarder, performance optimised)

Model

958.2 with engine 906.9, 926.9

with code BA1 (Voith retarder, performance optimised)

Model

958.4 with engine 457.9

with code BA1 (Voith retarder, performance optimised)

Modification notes

30.10.2019

Oil separator cover

BA43.30-B-1007-01E

1

Bolts

2

Housing

3

Seal ring

4

Filter



Remove

 Warning

Risk of injury caused by touching hot retarder and by scalding from hot retarderoil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure

Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder.

AS43.30-Z-0001-01A

1

Place the operating lever for adjusting the continuous engine/brake in the "0" position, and turn off the ignition

2

Remove attachment screws (1)

3

Remove the case (2), remove the filter (4)

 Clean the case (2).



Install

4

Install the filter (4), install the case (2)

 Replace the filter (4) and the sealing ring (3).

5

Tighten the attachment screws (1)

 Oil separator cover

*BA43.30-B-1007-01E

 Retarder (hydraulic)

Number

Designation

Chassis 934, 936, 938, 958 with Code BA1 (Voith retarder with optimized performance)

BA43.30-B-1007-01E

Oil separator cover

Nm

30