P42.20-0202-01
P42.20-0201-01
85 Front brake control cable
86 Rear brake control cables
89 Adjustment screw
105 Adjustment device
| Readjust parking brake if pedal can be pressed down 5 notches (model 124, model 129 up to 08/95) or 10 notches on pedal assembly with friction brake | ||
1 | Completely loosen adjustment screw (89) | Turnbuckles must not be tensioned | |
2 | Turn brake disc until screw hole is approx. 45° to the rear on the top | ||
3 | Turn adjusting device (105) until the brake disc can no longer be turned | Use screwdriver (size 4.5 mm) to reach through screw hole into adjusting wheel on adjusting device | |
Adjustment direction to tighten brake shoes: | |||
4 | Turn adjusting wheel back (5-6 teeth) so that the brake disc can be turned freely | When loosening ensure that both sides are turned back exactly 5-6 teeth | |
5 | Screw in adjustment screw (89) until the brake cables no longer sag | ||
6 | Apply parking brake a number of times with force of approx. 400 N | ||
7 | Screw adjustment screw (89) into adjustment bracket until parking brake pedal can be pressed down one tooth using medium force of 150-180 N | Parking brake should start taking effect after 1 notch | |
8 | Release parking brake and check brake discs for freedom of motion |