P42.10-2945-08
1 | Lining thickness |
P42.10-2946-08
1 | Lining thickness | 2 | Flashlight | 3 | Mirror |
| Check | ||
Danger ! | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Notes on repairs to brake system | ||
1 | Assess lining thickness (1) of brake linings on front axle | If necessary, use flashlight (2) or mirror (3). The thickness of the pad backing plate can be used as a guide when assessing lining thickness (1). | |
Front axleBrake lining | |||
If, in exceptional cases, assessment by means of visual inspection is not possible: | |||
| |||
Detach wheel and tire assemblies and inspect them, subject to separate repair order. | |||
2 | Assess lining thickness (1) of brake linings on rear axle | If necessary, use flashlight (2) or mirror (3). The thickness of the pad backing plate can be used as a guide when assessing lining thickness (1). | |
Rear axleBrake pad | |||
If, in exceptional cases, assessment by means of visual inspection is not possible: | |||
| |||
Detach wheel and tire assemblies and inspect them, subject to separate repair order. | |||
3 | Determine likely remaining distance of brake linings | ||
| |||
Per axle, the brake pad with the least lining thickness (1) is to be used for determining the likely remaining distance. In order to avoid an unscheduled workshop visit between services, it is necessary to determine the remaining distance of the present brake linings. If the remaining distance determined is smaller than the next service interval, premature brake pad replacement should be recommended to the customer. |
Check values for front brake lining |
Number | Designation | Model 207.301/302/347/348/401/402/447/448 | Model 207.301/302/347/348/401/402/447/448 | ||
BE42.10-P-1001-05L | Brake lining | Brake lining, new | mm | 12,5 | 14,0 |
Pad backing plate | mm | 5,5 | 5,5 | ||
Wear limit | mm | 2,0 | 2,0 | ||
Brake wear indicator activated (if installed) | mm | 2...3 | 2...3 |