Model | 117, 118, 123, 124, 126, 129, 140, 156, 163, 164, 166, 167, 168, 169, 170, 171, 172, 176, 177, 190, 197, 199, 201, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 238, 240, 242, 245, 246, 247, 251, 253, 257, 290, 292, 293 |
Model | 414 |
Model | 453 |
Model | 460, 461, 463 |
P40.10-0001-01
Shoulder wear on tires of front axle | ||||
Center wear on tires of rear axle | ||||
P40.10-0002-01
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Information on tires / rims | ||
Topical note | Limited maximum speed for winter tires with speed index V | ||
Preparatory activity | |||
1 | Lift vehicle with lifting platform. | ||
| Model 117, 118, 123, 124, 126, 129, 140, 156, 163, 164, 166, 167, 168, 169, 170, 171, 172, 176, 177, 190, 197, 199, 201, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 238, 240, 242, 245, 246, 247, 251, 253, 257, 290, 292, 293 | ||
Model 414 | |||
| Check | ||
2 | Assess wear pattern of tires on front and rear axle. | Greater wear at the shoulder compared to the center of the tire is normal for the front wheel-and-tire assemblies. On the tires of the rear wheel-and-tire assemblies the wear at the center of the tread depth is mostly somewhat more pronounced than at the tire shoulders. | |
If an unusual wear pattern is present, | |||
| |||
rectify problem. | |||
After obtaining special order. | |||
3 | Assess tire tread depths of tires on front and rear axle. | | |
The major tread must exhibit a minimum tread depth of at least 1.6 mm (0.06 inches) along its entire circumference. Assess tire tread depth at point of greatest wear. | |||
The cited tire tread depths apply for the Federal Republic of Germany. Observe other country-specific requirements accordingly. | |||
If the minimum tread depth is reached, | |||
| |||
replace the tire. | |||
After obtaining special order. | |||
4.1 | Check manufacturing date of tires on front and rear axle. | Model 221.128 | |
| |||
If manufacturing date is more than 6 years ago: | |||
| |||
for safety reasons, replace the tire. | |||
After obtaining special order. | |||
4.2 | Check manufacturing date of tires on front and rear axle. | Model 461, 463 | |
If the manufacturing date for Bridgestone or Kumho tires is older than 3 years, | |||
| |||
for safety reasons, replace the tire. | |||
|
| ||
After obtaining special order. | |||
5 | Check mileage of tires on front and rear axle. | Model 461, 463 | |
If the tires are Bridgestone or Kumho and a mileage of 20,000 km (12,500 mi) is reached, | |||
| |||
for safety reasons, replace the tire. | |||
|
| ||
After obtaining special order. | |||
6 | Check mileage of rims on front and rear axle. | Model 461, 463 | |
If a mileage of 80,000 km (50,000 mi) is reached, | |||
| |||
replace rims for safety reasons. | |||
|
| ||
After obtaining special order. | |||
Finishing activity | |||
7 | Lower vehicle with vehicle lift. | ||
| Model 117, 118, 123, 124, 126, 129, 140, 156, 163, 164, 166, 167, 168, 169, 170, 171, 172, 176, 177, 190, 197, 199, 201, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 238, 240, 242, 245, 246, 247, 251, 253, 257, 290, 292, 293 | ||
Model 414 |