Remove/install wheels, rotate if necessary

AP40.10-P-4050CW

04.02.2019

Model

204, 207

Remove/install wheels, rotate if necessary

P40.10-4915-01

Left illustration


	Right figure
		Interchange wheel-and-tire assemblies (vehicles without mixed tires)

P40.10-4916-01

 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
Topical note	Limited maximum speed for winter tires with speed index V		AH40.10-P-1020-03A
Topical note	Information on tires / rims		AH40.10-P-9411-01A
	Remove
1	Lift vehicle with lifting platform.
2	Remove hub caps.	Vehicles with hubcaps
3	Unscrew wheel bolts and remove wheel and tire assemblies.	 Model 204.9 Remove wheel and tire assemblies using wheel lift dolly only. The brake disks and complete wheels can otherwise be damaged.
	Check
4	Check tires for damage and condition.		AP40.10-P-4051EW
	Install
5	Clean and check components of wheel threaded connections, and protect against corrosion.		AP40.10-P-4050-01A
		 Before mounting a wheel-and-tire assembly all the operation steps listed in the linked description must be conducted carefully. The complete wheel can otherwise work its way loose from the vehicle.
		Paste, hot lubrication 1 kg, DBL 6879.20	*BR00.45-Z-1005-06A
6	Swap over wheel and tire assemblies on front and rear axle.	If necessary, subject to separate repair order and only for vehicles without mixed tires.
		 Maintain running direction of wheel and tire assemblies. Otherwise handling characteristics and handling comfort may be impaired and tire wear increased.
7	Mount wheel and tire assemblies and tighten wheel bolts.	 Model 204.9 Remove wheel and tire assemblies using wheel lift dolly only. The brake disks and complete wheels can otherwise be damaged.
		 Observe tightening sequence and tightening torque.
		 MODEL 204, 207Wheel bolt	*BA40.10-P-1001-01M
8	Lower vehicle.
9	Correct tire pressure of tires on front and rear axle.		AP40.15-P-4061A
		If unusual tire pressure loss occurs,
		
		determine cause and correct.
		 After obtaining special order.
10	Install hub caps.	Vehicles with hubcaps
		 Check for correct positioning of hubcap to valve and for correct seating. Otherwise the valve will be damaged or the hubcap will be lost.
11.1	Activate tire pressure monitoring system.	With CODE 470 (Tire pressure monitor (standard)) or with CODE 475 (Tire pressure monitor)
		Model 204	AR54.30-P-1001-01RAD
		MODEL 207	AR54.30-P-1000-02RAU
		 Only for wheel-and-tire assembly change, tire replacement or a change in tire pressure.
11.2	Activate tire pressure loss warning.	Except CODE 470 (Tire pressure monitor (standard)) and except CODE 475 (Tire pressure monitor)
		Model 204	AR54.30-P-1000-02RAC
		MODEL 207	AR54.30-P-1000-02RAE
		 Only for wheel-and-tire assembly change, tire replacement or a change in tire pressure.

 Wheels

Number	Designation		MODEL 204.0/2/3 except CODE P98	MODEL 204.0/2/3 with CODE P98
BA40.10-P-1001-01M	Wheel bolt	Nm	130	180

 Wheels

Number	Designation		Model 204.9	Model 207
BA40.10-P-1001-01M	Wheel bolt	Nm	150	130

Repair materials

Number	Designation	Order number
BR00.45-Z-1005-06A	Paste, hot lubrication 1 kg, DBL 6879.20	A 000 989 76 51

เอกสารที่อ้างถึง