ap3530t3560a

Rear axle - adjusting adjustment screw with sliding block

ประเภท ap · หัวข้อ 35.30 · เวอร์ชัน 0102 · 2005-07-12

ใช้กับ: REAR AXLE 745.861 in MODEL 613.355 REAR AXLE 745.862 in MODEL 613.455 /485 REAR AXLE 745.997 in MODEL 613.358 /388

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — ซีรีส์ 613 (รุ่น 355, 358, 388, 455, 485)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.30 Rear axle assembly — ซีรีส์ 613 (รุ่น 355, 358, 388, 455, 485)

EinPAS 17 Drivetrain/axle › 17.52 Additional axle › 17.52.30 Additional axle, complete — ซีรีส์ 613 (รุ่น 355, 358, 388, 455, 485)

ใช้กับเครื่องยนต์/เกียร์ด้วย: 745 861, 745 862, 745 997

AP35.30-T-3560A

Rear axle - adjusting adjustment screw with sliding block

22.10.98

REAR AXLE 745.861 in MODEL 613.355

REAR AXLE 745.862 in MODEL 613.455 /485

REAR AXLE 745.997 in MODEL 613.358 /388

Rear axle - adjusting adjustment screw with sliding block
Rear axle - adjusting adjustment screw with sliding block
Rear axle - adjusting adjustment screw with sliding block

T35.30-0005-01

T35.30-0004-01

T35.30-0003-01

1 Adjusting bolt

2 Counternut

Adjustment screw with slot

1 Adjusting bolt

2 Counternut

3 Sliding block

Adjustment screw with hexagon socket

1 Adjusting bolt

2 Counternut

3 Sliding block

Setting

1

Slacken and hold locknut (2)

2

Screw in adjustment screw (1) until the sliding block (3) touches the crown wheel

3

Set gap by unscrewing adjusting screw (1)

1/8 revolution.

4

Tighten locknut (2)

Hold adjusting screw (1) while doing this.