Rear axle - adjusting adjustment screw with sliding block

Type ap · topic 35.30 · version 0102 · 2005-07-12

Applies to: REAR AXLE 745.861 in MODEL 613.355 REAR AXLE 745.862 in MODEL 613.455 /485 REAR AXLE 745.997 in MODEL 613.358 /388

Where it sits

Function group 2 Chassis › 35 Rear axle › 35.30 Final drive, drive shafts — Series 613 (models 355, 358, 388, 455, 485)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.30 Rear axle assembly — Series 613 (models 355, 358, 388, 455, 485)

EinPAS 17 Drivetrain/axle › 17.52 Additional axle › 17.52.30 Additional axle, complete — Series 613 (models 355, 358, 388, 455, 485)

Also applies to engines/gearboxes: 745 861, 745 862, 745 997

AP35.30-T-3560A

Rear axle - adjusting adjustment screw with sliding block

22.10.98

REAR AXLE 745.861 in MODEL 613.355

REAR AXLE 745.862 in MODEL 613.455 /485

REAR AXLE 745.997 in MODEL 613.358 /388

T35.30-0005-01

T35.30-0004-01

T35.30-0003-01

1 Adjusting bolt

2 Counternut

Adjustment screw with slot

1 Adjusting bolt

2 Counternut

3 Sliding block

Adjustment screw with hexagon socket

1 Adjusting bolt

2 Counternut

3 Sliding block

	Setting
1	Slacken and hold locknut (2)
2	Screw in adjustment screw (1) until the sliding block (3) touches the crown wheel
3	Set gap by unscrewing adjusting screw (1)	 1/8 revolution.
4	Tighten locknut (2)	 Hold adjusting screw (1) while doing this.