Shown on model 222.133 with code M005 (4MATIC) |
1 | Camber strut |
2 | Camber strut elastomer bearing |
3 | Strut rod |
4 | Strut rod elastomer bearing |
5 | Stabilizer bar |
5a | Stabilizer bar bushing |
6 | Shift rail |
7 | Shift rail elastomer bearing |
P35.20-2425-06
P35.20-2428-09
Shown on model 222.133 with code M005 (4MATIC) |
8 | Rear axle carrier elastomer bearing | 13 | Spring control arm | |
9 | Spring control arm elastomer bearing | 14 | Thrust arm elastomer bearing | |
10 | Rear axle carrier | 15 | Tie rod elastomer bearing | |
11 | Rear axle differential elastomer bearing | 15a | Tie rods | |
12 | Rear axle shafts | 16 | Thrust arms |
P35.20-2429-09
Shown on model 222.133 with code M005 (4MATIC) |
17 | Outer drive shaft boots | 19 | Clamps | |
18 | Inner drive shaft boots |
Shown on model 217.483 |
30 | Rear diagonal struts |
P35.10-2494-06
Shown on model 222.183 |
20 | Linkage level sensor |
P35.00-2133-05
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Preparatory activity | |||
1 | Release parking brake. | ||
2 | Lift vehicle with lifting platform. | ||
| |||
| Check | ||
3 | Assess the wheel bearings by firmly tugging, pushing and turning at the wheels. | If problems occur, | |
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
4 | Check camber struts (1) for cracks, deformation and corrosion. | If problems occur, | |
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
5 | Check camber strut elastomer bearings (2) for cracks, deformation and wear as well as play by firmly pulling and pushing them. | Commercially available devices/tools | |
If problems occur, | |||
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
6 | Check rear diagonal struts (30) for cracks, deformation and corrosion. | Model 217.4 | |
If problems occur, | |||
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
7 | Check strut rods (3) for cracks, deformation and corrosion. | If problems occur, | |
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
8 | Check strut rod elastomer bearings (4) for cracks, deformation and wear, then check for play by firmly pulling and pushing them. | Commercially available devices/tools | |
If problems occur, | |||
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
9 | Check stabilizer bar (5) for cracks, deformation and corrosion. | Model 217, 222 | |
If problems occur, | |||
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
10 | Check stabilizer bar bushings (5a) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | Model 217, 222 | |
Commercially available devices/tools | |||
If problems occur, | |||
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
11 | Check shift rails (6) for cracks, deformation and corrosion. | Model 217, 222 | |
If problems occur, | |||
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
12 | Check shift rail elastomer bearings (7) for cracks, deformation and wear as well as for play by firmly pulling and pressing. | Model 217, 222 | |
Commercially available devices/tools | |||
If problems occur, | |||
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
13 | Check spring links (13) for cracks, deformation and corrosion. | If problems occur, | |
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
14 | Check spring link elastomer bearings (9) for cracks, deformation and wear as well as for play by firmly pulling and pushing. | If problems occur, | |
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
15 | Check thrust arms (16) for cracks, deformation and corrosion. | If problems occur, | |
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
16 | Check thrust arm elastomer bearings (14) for cracks, deformation and wear as well as for play by firmly pulling and pressing them. | If problems occur, | |
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
17 | Check tie rods (15a) for cracks, deformation and corrosion. | If problems occur, | |
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
18 | Check tie rod elastomer bearings (15) for cracks, deformation and wear as well as for play by firmly pulling and pressing them. | If problems occur, | |
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
19 | Check rear axle carrier (10) for cracks, deformation and corrosion. | If problems occur, | |
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
20 | Check rear axle carrier elastomer bearings (8) for cracks, deformation and wear. | Commercially available devices/tools | |
If problems occur, | |||
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
21 | Check rear axle differential elastomer bearings (11) for cracks, deformation and wear. | Commercially available devices/tools | |
If problems occur, | |||
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
22 | Check condition of rear axle shafts (12). | If problems occur, | |
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
23 | Check outer drive shaft boots (17) for condition, leaktightness and correct seating. | Commercially available devices/tools | |
If problems occur, | |||
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
24 | Check inner drive shaft boots (18) for condition, leaktightness and correct seating. | Commercially available devices/tools | |
If problems occur, | |||
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
25 | Check condition and seating of clamps (19). | If problems occur, | |
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
26 | Check linkage level sensor (20) for correct seating, cracks, deformation, corrosion and play. | Vehicle with level sensor. | |
Commercially available devices/tools | |||
If no problems occur, | |||
| |||
rectify the problems. | |||
Subject to separate repair order. | |||
Finishing activity | |||
27 | Lower vehicle with vehicle lift. | ||
|