P00.20-2901-08
Shown on model 217.4 without code M005 (4MATIC) |
1 | Front center engine compartment paneling | 3 | Rear engine compartment paneling | |
2 | Center engine compartment paneling |
Shown on model 217.4 without code M005 (4MATIC) |
4 | Strut rod |
4a | Strut rod elastomer bearing |
7 | Spring control arm |
8 | Spring control arm elastomer bearing |
9 | Stabilizer bar |
18 | Front axle carrier |
22 | Front diagonal struts |
P33.10-2499-06
Shown on model 217.4 without code M005 (4MATIC) |
5 | Spring control arm joint |
6 | Spring control arm joint boot |
9a | Stabilizer bar mounting |
19 | Shock absorber elastomer bearing |
20 | Strut rod joint boot |
21 | Strut rod joint |
P33.10-2435-06
Shown on model 217 with code M005 (4MATIC) |
10 | Shift rail joints |
11 | Shift rail |
12 | Shift rail joint boots |
13 | Linkage level sensor |
P33.10-2436-06
Shown on model 217 with code M005 (4MATIC) |
14 | Outer axle shaft boot |
15 | Inner axle shaft boot |
16 | Drive shaft |
17 | Clip |
P33.10-2437-06
Shown on model 217.4 without code M005 (4MATIC) |
23 | Upper transverse control arm universal joint |
24 | Elastomer bearing on upper transverse control arm |
25 | Universal joint boot for upper transverse control arm |
26 | Upper transverse control arm |
P33.10-2498-06
Danger ! | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Preparatory activity | |||
1 | Lift vehicle on vehicle lift | ||
| |||
| Check | ||
2 | Check underfloor paneling when driving over obstacles or for any bottoming damage | If the underfloor paneling exhibits any damage: | |
| |||
Rectify problem subject to separate repair order | |||
| Remove | ||
3 | Remove front center engine compartment paneling (1), center engine compartment paneling (2) and rear engine compartment paneling (3) | ||
| |||
| Check | ||
4 | Check wheel bearing by firmly pulling, pushing and turning the wheels | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
5 | Check front axle carrier (18) for cracks, deformation and corrosion | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
6 | Check front diagonal struts (22) for cracks, deformation and corrosion | Model 217.4 | |
If complaint present | |||
| |||
Rectify problem subject to separate repair order. | |||
7 | Check shock absorber elastomer bearing (19) for cracks, deformation and wear, then check for play by firmly pulling and pushing | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
8 | Check spring control arm (7) for cracks, deformation and corrosion | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
9 | Check spring control arm elastomer bearing (8) for cracks, deformation and wear and for play by firmly pulling and pushing | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
10 | Check strut rods (4) for cracks, deformation and corrosion | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
11 | Check strut rod elastomer bearing (4a) for cracks, deformation and wear and for play by firmly pulling and pushing | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
12 | Check stabilizer bar (9) for cracks, deformation and corrosion | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
13 | Check stabilizer bar bushings (9a) for cracks, deformation and wear, then check stabilizer bar (9) for play by firmly pulling and pushing | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
14 | Check spring control arm joint boots (6) for condition, leaktightness and correct seating | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
15 | Check spring control arm joints (5) for deformation and wear, as well as for play by firmly pushing and pulling | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
16 | Check strut rod joint boots (20) for condition, leaktightness and correct seating | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
17 | Check strut rod joints (21) for deformation and wear, as well as for play by firmly pushing and pulling | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
18 | Shift rail joint boots (12) for condition, leaktightness and correct seat | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
19 | Check shift rail joints (10) for play by firmly pulling and pushing | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
20 | Check shift rails (11) for deformation and corrosion | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
21 | Check outer drive shaft boots (14) for condition, leaktightness and correct seating | Model 217, 222 | |
If complaint present | |||
| |||
Rectify problem subject to separate repair order. | |||
22 | Check inner drive shaft boots (15) for condition, leaktightness and correct seating | Model 217, 222 | |
If complaint present | |||
| |||
Rectify problem subject to separate repair order. | |||
23 | Check clamps (17) for cracks, deformation, corrosion and correct seating | Model 217, 222 | |
If complaint present | |||
| |||
Rectify problem subject to separate repair order. | |||
24 | Check drive shafts (16) for cracks, deformation, corrosion and for play by firmly pushing and pulling | Model 217, 222 | |
If complaint present | |||
| |||
Rectify problem subject to separate repair order. | |||
25 | Check linkage level sensor (13) for correct seating, cracks, deformation, corrosion and play | Vehicle with level sensor. | |
If complaint present | |||
| |||
Rectify problem subject to separate repair order. | |||
26 | Check elastomer bearing for upper transverse control arm (24) for cracks, deformation and for play by firmly pulling and pushing | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
27 | Check upper transverse control arm universal joint boots (25) for condition, leaktightness and correct seating | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
28 | Check upper transverse control arm (23) for play by firmly pushing and pulling | If complaint present | |
| |||
Rectify problem subject to separate repair order. | |||
| Install | ||
30 | Install front center engine compartment paneling (1), center engine compartment paneling (2) and rear engine compartment paneling (3) | ||
|