G33.25-3195-01
G33.25-3289-71
G33.25-3197-01
Shown on hub reduction gear of front axle 737.570/571 |
1 | Filling screw |
Shown on hub reduction gear of front axle 737.572 |
1 | Filling screw |
Shown on hub reduction gear of front axle 737.580/590 |
1 | Filling screw |
Front-axle differential |
3 | Filling screw |
G33.30-3183-01
| Check | ||
1 | Secure vehicle against rolling | The vehicle should be parked on a level, horizontal surface. | |
2 | Clean area around filling screws (1, 3) | ||
3 | Unscrew filling screw (3) from differential and check oil level | The oil level is correct when the lubricant reaches to the lower edge of the filler opening. Correct the oil level as indicated. | |
Axle drive (synthetic oil)Axle drive (synthetic oil) | |||
4 | Screw in filling screw (3) | Filling screw to differential | |
5 | Check the outside and inside of the wheel hubs for leaks | Small areas displaying a limited amount of seepage are not a cause for concern. Substantial leakage accompanied by continuous oil loss should be rectified immediately - write up on separate invoice. | |
6 | Remove filling screw (1) from hub reduction gear housing and check oil level | The oil level is correct if the oil is no more than 10 mm below the oil filler opening. Correct the oil level as indicated. | |
Hub drive (synthetic oil)Hub drive (synthetic oil) | |||
7 | Screw in filling screw (1) | Filling screw to hub reduction gear |