P32.25-A010-09
Shown on model 167 with code 489 (AIRMATIC) and code 490 (Electrohydraulic suspension) |
1 | Front shock absorber | 3 | Front elastomer bearing | |
2 | Front boot | 4 | Front air spring |
Shown on model 167 with code 489 (AIRMATIC) and code 490 (Electrohydraulic suspension) |
1 | Front shock absorber |
20 | Electrical connector |
21 | Electrical lines |
P32.25-A014-06
P32.25-A016-09
Shown on model 167 with code 489 (AIRMATIC) and code 490 (Electrohydraulic suspension) |
16 | Front delivery pump | 18 | Hydraulic lines | |
17 | Elastomer bearing | 19 | Electrical lines |
P32.25-A015-09
Shown on model 167 with code 489 (AIRMATIC) and code 490 (Electrohydraulic suspension) |
5 | Rear air spring | 9 | Lower centering | |
6 | Rear boot | 10 | Rear shock absorbers | |
7 | Electrical connector | 22 | Stop buffer | |
8 | Upper centering | 23 | Electrical line |
P32.25-A012-09
Shown on model 167 with code 489 (AIRMATIC) and code 490 (Electrohydraulic suspension) |
11 | Rear elastomer bearing | 14 | Elastomer bearing | |
12 | Electrical line | 15 | Rear delivery pump | |
13 | Hydraulic lines |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Preparatory activity | |||
1 | Lift vehicle with lifting platform. | ||
| |||
| Check | ||
2 | Check front shock absorbers (1) for leaks. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
3 | Check front air springs (4) for damage and leaks. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
4 | Check that front boots (2) are correctly seated and are not damaged. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
5 | Check front elastomer bearings (3) for cracks, deformation and wear; also check for play by firmly pulling and pushing on front shock absorbers (1). | ||
If necessary, use commercially available devices/tools. | |||
The front elastomer bearings (3) must be seated with zero clearance in the housing eye and they may not be cracked or damaged. | |||
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
6 | Check visible systems, components, lines and hoses of front electrohydraulic suspension for damage, correct routing, leaks, correct mounting and corrosion. | Model 167 | |
If necessary, use commercially available devices/tools. | |||
Front delivery pump (16), | |||
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
7 | Check rear shock absorbers (10) for leaks. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
8 | Check rear air springs (5) for damage and leaks. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
9 | Check that rear air springs (5) are correctly seated in upper centering (8) and lower centering (9). | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
10 | Check that rear boots (6) are correctly seated and are not damaged. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
11 | Check stop buffers (22) for cracks, deformation and wear. | If necessary, use commercially available devices/tools. | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
12 | Check rear elastomer bearings (11) for cracks, deformation and wear; also check for play by firmly pulling and pushing on rear shock absorbers (10). | ||
If necessary, use commercially available devices/tools. | |||
The rear elastomer bearings (11) must be seated with zero clearance in the housing eye and they may not be cracked or damaged. | |||
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
13 | Check visible systems, components, lines and hoses of rear electrohydraulic suspension for damage, correct routing, leaks, correct mounting and corrosion. | Model 167 | |
If necessary, use commercially available devices/tools. | |||
Rear delivery pump (15), | |||
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
Finishing activity | |||
14 | Lower vehicle with vehicle lift. | ||
|