Shown on model 292.3 with engine 276.8 |
1 | Bolts |
4 | Rear oil line |
7 | Feed line |
8 | Auxiliary oil filter |
P27.56-0010-06
Shown on model 292.3 with engine 642, bracket (9) installed |
1 | Bolts |
4 | Rear oil line |
7 | Feed line |
8 | Auxiliary oil filter |
9 | Bracket |
P27.56-0011-06
Shown on model 292.3 with engine 642, bracket (9) removed |
1 | Bolts |
4 | Rear oil line |
7 | Feed line |
8 | Auxiliary oil filter |
9 | Bracket |
P27.56-0012-06
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Danger | Risk of death caused by vehicle slipping or toppling off during lifting | Only lift vehicle at the lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Notes on automatic transmission | |||
| Remove | ||
1 | Remove center underfloor paneling and rear underfloor paneling | ||
| |||
2 | Remove holder (9) and place to one side with electric lines | Transmission 725.0 in model 292 with engine 642 | |
3 | Remove rear oil line (4) | ||
| |||
Collect escaping transmission oil in a suitable container and seal off connection fittings. | |||
Record plug | |||
4 | Release and disconnect feed line (7) on transmission | ||
| |||
Collect escaping transmission oil in a suitable container and seal off connection fittings. | |||
Record plug | |||
5 | Remove bolts (1) and remove additional oil filter (8) with holder | ||
| Install | ||
6 | Install new rear oil line (4) between transmission and thermostat | ||
| |||
Oil line to transmission OM642 | |||
Oil line to transmission M276 | |||
7 | Mount holder (9) with electric lines | Transmission 725.0 in model 292 with engine 642 | |
| Check | ||
8 | Inspect transmission oil level | ||
| Transmission 725.0 in model 292 with engine 276.8 | ||
Transmission oil level correct. | |||
| |||
Continue with operation step 9. | |||
Transmission oil level not correct. | |||
| |||
Rectify problem subject to separate repair order. | |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Conduct transmission test run and check transmission for leak tightness and proper operation | ||
| Install | ||
10 | Install center underfloor paneling and rear underfloor paneling | ||
|
129 589 00 91 00
Record plug