1 | Coolant expansion reservoir |
2 | Cap |
P20.30-2465-06
Danger ! | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
| Notes on coolant | ||
Preparatory tasks | |||
1 | Open front flap | ||
| Check | ||
2 | Check coolant level | The coolant level must be between the "Min." and "Max." markings on the coolant expansion reservoir (1) when the engine is cold. | |
Coolant level within "Min." and "Max." markings | |||
| |||
Coolant level correct, check complete, no further operations steps necessary. | |||
Coolant level outside "Min." and "Max." markings | |||
| |||
Check coolant level in coolant expansion reservoir (1), continue with operation step 3. | |||
| Remove | ||
3 | Unscrew cap (2) of coolant expansion reservoir (1) | ||
| Check | ||
4 | Check coolant level | If coolant level is too low | |
| |||
Check coolant for leaktightness and check coolant for antifreeze content subject to separate repair order. | |||
| Anticorrosion agent/antifreeze (specification 325.5) | ||
| Premixed coolant (specification 326.5) | ||
Coolant mixing ratio | |||
| Install | ||
5 | Seal coolant expansion reservoir (1) with cap (2) | ||
Concluding tasks | |||
6 | Close front flap |