ap2000s2011e

Engine cooling system - inspecting fluid level, adjusting to correct level

ประเภท ap · หัวข้อ 20.00 · เวอร์ชัน 0103 · 2019-06-05

ใช้กับ: Engine 274 in model 447 Engine 274 in model 448 Engine 622, 651, 654 in model 447

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 1 Engine › 20 Engine cooling system › 20.00 General — ซีรีส์ 447 · ซีรีส์ 448 · ซีรีส์ 622 · ซีรีส์ 651 · ซีรีส์ 654

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.5 Coolant circuit, complete — ซีรีส์ 447 · ซีรีส์ 448 · ซีรีส์ 622 · ซีรีส์ 651 · ซีรีส์ 654

ใช้กับเครื่องยนต์/เกียร์ด้วย: 274 ***

AP20.00-S-2011E

Engine cooling system - inspecting fluid level, adjusting to correct level

03.06.2019

Engine

274 in model 447

Engine

274 in model 448

Engine

622, 651, 654 in model 447

Engine cooling system - inspecting fluid level, adjusting to correct level

S20.00-4527-11

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

Notes on coolant

AH20.00-N-2080-01A

Check

1

Switch off ignition.

2

Unscrew cap of coolant expansion reservoir.

3

Check for coolant corrosion and antifreeze protection.

Rectify corrosion inhibitor and antifreeze protection for coolant in line with findings report.

4

Check coolant level.

The coolant temperature must be  50 °C.

Service Information: Coolant

Model 447

SI20.00-S-0001B

The coolant level on a cold engine must reach up to the marking (arrow) on the coolant expansion reservoir. For warm coolant the coolant level must be about 10 mm above the marking (arrow).

If the coolant level is incorrect,

Correct coolant level.

5

Screw cap back onto coolant expansion reservoir.

เอกสารที่อ้างถึง