ap2000g201001h

Correcting anticorrosion/antifreeze concentration

ประเภท ap · หัวข้อ 20.00 · เวอร์ชัน 0103 · 2018-05-30

ใช้กับ: Engine 470.9, 471.9 in model 800.110/112 Engine 470.9, 471.9, 473.9 in model 800.310/320

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 1 Engine › 20 Engine cooling system › 20.00 General — ซีรีส์ 470 (รุ่น 9**) · ซีรีส์ 471 (รุ่น 9**) · ซีรีส์ 800 (รุ่น 110, 112, 310, 320)

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.5 Coolant circuit, complete — ซีรีส์ 470 (รุ่น 9**) · ซีรีส์ 471 (รุ่น 9**) · ซีรีส์ 800 (รุ่น 110, 112, 310, 320)

ใช้กับเครื่องยนต์/เกียร์ด้วย: 473 9**

AP20.00-G-2010-01H

Correcting anticorrosion/antifreeze concentration

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Coolant specifications

BB00.40-P-0310-01A

Anticorrosion agent/antifreeze (specification 325.5)

BB00.40-P-0325-05A

Premixed coolant (specification 326.5)

BB00.40-P-0326-05A

Engine

470.9, 471.9 in model 800.110/112

Engine

470.9, 471.9, 473.9 in model 800.310/320

Correcting anticorrosion/antifreeze concentration

Table for calculating refill quantity of anticorrosion and antifreeze agent

A

Anticorrosion agent concentration and antifreeze concentration (in % by volume)

B

Total quantity of coolant (in liters)

C

Replenishment quantity of anticorrosion agent and antifreeze (in liters)

N20.00-0377-04

Correcting anticorrosion/antifreeze concentration

Example calculation

N20.00-0376-04

Example of calculation:
Measured antifreeze protection -20 °C = 32 Vol.-%
Anticorrosion agent concentration and antifreeze concentration (in % by volume) (A)
Total coolant capacity (in liters) (B) = 41 l
Required top-off quantity of anticorrosion and antifreeze agent (in liters) (C) = 10.85 l

1

Anticorrosion agent concentration and antifreeze concentration (in % by volume) (A) in calculation table.

2

Enter total coolant filling quantity (in liters) (B) into calculation table as specified by vehicle manufacturer.

3

Calculate required refill quantity of anticorrosion and antifreeze (in liters) (C).

4

Drain coolant in the calculated top-up quantity of anticorrosion and antifreeze (in liters) (C) from cooling system.

5

Add calculated refill quantity for anticorrosion and antifreeze (in liters) (C) into cooling system.

6

Start the engine and run for about 1 minute at varying speeds.

เอกสารที่อ้างถึง