1 | Main menu button |
2 | Accept call button |
3 | "OK" button |
4 | Scroll forward/back button |
5 | Back button |
6 | Multifunction display |
G82.90-0001-75
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Dialing | |||
1 | Close doors. | ||
2 | Turn ignition key to position "1". | There must be no error messages displayed on the multifunction display (6). | |
3 | Press Main menu button (1) repeatedly until the "Trip" menu item is highlighted on the multifunction display (6) and confirm with the "OK" button (3). | Perform operation step 4 within approx. 5 seconds after the "Total distance" standard display appears. | |
4 | First press and hold down Accept call button (2) and then, within 1 second, also press the"OK" button (3) and hold for approx. 5 seconds. | The workshop menu is displayed on the multifunction display (6) with the following tabs: "Vehicle data", "Dynamometer test", "Brakepad replacement" (depending on equipment installed) and "ASSYST PLUS". | |
5 | Press Scroll forward and backward button (4) repeatedly until "Vehicle data" is highlighted and confirm selection with the "OK" button (3). | The oil filling capacity in the oil pan is displayed without the oil filter on the multifunction display (6). | |
6 | Start engine. | Vehicle must be level. | |
7 | Press Scroll forward or backward button (4) repeatedly until "Oil level" is displayed. | The oil level is displayed on the multifunction display (6). | |
8 | Press Scroll forward or backward button (4) repeatedly until "-.- l until maximum oil level" is displayed. | The oil filling capacity until the maximum oil level is displayed on the multifunction display (6). | |
| Check | ||
9 | Check engine oil level using "-.- l until maximum oil level" display. | If the display value is 0.2 l to -0.1 l, | |
| |||
engine oil level is OK. | |||
If the display value is < 0.1 l. | |||
| |||
Switch off engine, drain off displayed oil filling capacity and repeat test from operation step 1. | |||
If the display value is > 0.2 l. | |||
| |||
Switch off engine, fill displayed oil filling capacity and repeat test from operation step 1. | |||
Deactivation | |||
10 | To change to the main menu, press the Main menu button (1). | ||
11 | Switch off engine. |