Engine | 460.9 in model 963, 964 |
with code M8B (Air intake behind cab, mounted) | |
except code M8A (Air intake, from front) | |
Engine | 460.9 in model 963, 964 |
with code M8C (Air intake, cab side wall, attached) | |
Engine | 460.9 in model 963, 964 |
with code M8D (Air intake, above corner, integrated in cab) | |
Engine | 470.9, 471.9, 473.9 in model 963, 964 |
with code M8C (Air intake, cab side wall, attached) | |
Engine | 470.9, 471.9, 473.9 in model 963, 964 |
with code M8D (Air intake, above corner, integrated in cab) | |
Engine | 470.9, 471.9, 473.9, 936.9 in model 963, 964 |
with code M8B (Air intake behind cab, mounted) | |
except code M8A (Air intake, from front) |
1 | Air filter cover |
2 | Bolts |
3 | Air filter element |
N09.10-2100-04
Tightening pattern |
N09.10-2101-01
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Notes on tilting the cab | ||
| Remove | ||
1 | Tilt cab. | ||
2 | Remove air filter cover (1). | To do this, remove screw/bolts (2). | |
3 | Remove air filter element (3). | Clean inside of air filter housing with a lint-free cleaning cloth if necessary. | |
| Install | ||
4 | Install new air filter element (3). | Ensure it is correctly seated on the sealing surfaces. | |
5 | Install air filter cover (1). | Place screws/bolts (2) evenly. | |
6 | Tighten screws (2) according to tightening pattern. | Engine 460.9Bolt, filter cover to air filter housing | |
Engine 470.9, 471.9, 473.9, 936.9Bolt, filter cover to air filter housing | |||
7 | Tilt the cab back into drive mode. | ||
8 | Confirm replacement of air filter insert (3) in maintenance booklet or in Digital Service Booklet (DSB). |