ap0910s0980ps

Replace air filter element

ประเภท ap · หัวข้อ 09.10 · เวอร์ชัน 0100 · 2018-06-22

ใช้กับ: Engine 642.8 in model 470, 471

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 1 Engine › 09 Air intake, turbocharging › 09.10 Air cleaner — ซีรีส์ 470 · ซีรีส์ 471

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.40 Air filter/air filter box — ซีรีส์ 470 · ซีรีส์ 471

ใช้กับเครื่องยนต์/เกียร์ด้วย: 642 8**

AP09.10-S-0980PS

Replace air filter element

19.06.2018

Engine

642.8 in model 470, 471

Replace air filter element

G09.10-3168-08

1

Right air filter housing upper section

4

Electrical connector

7

Clean air line

2

Left air filter housing upper section

5

Retaining clips

3

Vacuum line

6

Bolts

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove intake manifold pressure sensor from left air filter housing upper section (2).

AR07.04-S-0102PS

Do not disconnect electrical connector (4).

Installation: Only install upper engine cover after the leak test.

2

Unclip vacuum line (3) from upper section of air filter housing at right (1) and place to one side.

3

Open retaining clamps (5).

4

Remove screw/bolts (6).

Bolt connecting air filter housing to cylinder head cover

*BA09.10-N-1001-01PS

5

Remove air filter housing upper sections (1, 2) at side of clean air line (7).


Do not stretch or pressure flexible boots and do not disconnect.
Otherwise, the clean air line will be damaged (7).

Installation: Check for correct installation position of seals between air filter housing upper sections (1, 2) and clean air line (7).

6

Remove air filter housing upper sections (1, 2) with air filter elements upwards.

Installation: Clean insides of air filter housing lower sections.
Use new air filter housing upper sections (1, 2) with air filter elements.
Check for correct installation position of seals between air filter housing upper sections (1, 2) and air filter housing lower sections.

7

Install in the reverse order.

8

Check for leak tightness when engine is running.

9

Install upper engine cover.

10

Confirm conducted operations in maintenance booklet or in Digital Service Booklet (DSB).

Air filter

Number

Designation

Engine 642 in model 470, 471

BA09.10-N-1001-01PS

Bolt connecting air filter housing to cylinder head cover

Nm

9

เอกสารที่อ้างถึง