AP00.20-T-0051CA | All lines and hoses, sensor cables - checking tightness and condition | 8.5.02 |
MODEL NMB613.367 /368
| Testing | ||
1 | Switch off running engine if applicable | ||
2 | Carry out visual inspection of all oil/fuel/coolant/compressed air and refrigerant lines in the engine compartment | Check for leaktightness, chafe-free routing and proper fixing. | |
3 | Lift vehicle at the front axle | See operator's manual. | |
Danger! | Risk of accident from independent movement when working on jacked-up vehicle. Risk of injury from rotating parts when working on running engine or drive train. | Ensure that supports are in a safe condition. | |
4 | Start the engine and turn steering counterclockwise to the full extent then clockwise to the full extent | During the complete process, brake hoses and brake lines must not come into contact with other components due to the danger of chafing. | |
5 | Lower the vehicle and turn steering counterclockwise to the full extent then clockwise to the full extent | During the complete process, brake hoses and brake lines must not come into contact with other components due to the danger of chafing. | |
6 | Switch off engine | ||
7 | Rectify any leaks or damage immediately | Brakes lines which are chafed or damaged must be replaced due to the risk of accident and must be routed free from chafing |