| Removing | ||
1 | Remove engine control (EC) control unit | ||
| Remove/install engine control unit (MR) | ||
| Installing | ||
2 | Install 4 eco-point engine control (MR) control unit | After teaching in the keys, the parameters (button F2 in STAR DIAGNOSIS) must be adapted in the maintenance system (MS). When the button is operatedF2, the parameters are adapted automatically (optimized to Euro 3 as of engine end no. 197929). | |
| Remove/install engine control unit (MR) | ||
3 | Carry out engine oil and filter change | If the remaining distance is approx. 10,000 km we recommend changing the engine oil immediately. The service data can be read out in the maintenance system (MS). | |
| Engine oil and filter change | ||
4 | Request COP DOCUMENT and fill out. | The COP DOCUMENT must be requested from the Federal Office for Goods Traffic, Winzererstraße 52, in 80797 Munich. | |
This must be completed and signed by the relevant dealer or authorized agent on the basis of the emission level summary for eco-points (Austria) and CEMT approvals (low noise and low pollution vehicles). | |||
| COP DOCUMENT specimen certificate |
Commercially available tools
Number | Designation | |
WH58.30-Z-1049-13A | STAR DIAGNOSIS Compact diagnostic system for commercial vehicles | 651 131 10 00 |
Parts ordering notes
Part no. | Designation | Quantity |
A 001 446 13 40 05 | 4 eco-points control unit (EC/PLN) for Euro 3 engines (542.9, 541.9 457.9) | 1 |
Notes on ordering parts: When ordering a new control unit, the engine number and the equipment code of the old control unit must be provided. For the new Euro 3 control unit with four eco-points, a price of around Euro 2,000 plus VAT, must be allowed for. If the old control unit is returned with the original order slip for the new Euro 3 control unit with four eco-points, a sum of around Euros 300 plus VAT will be reimbursed. If the old control unit is returned, the parts number A 001 446 13 40 06 must be entered on the original order slip. After successfully ordering parts (A 001 446 13 40 05), the necessary SA changes are performed automatically in the vehicle documentation system by GLC Germersheim. Further correction of the vehicle documentation system by the workshop is no longer necessary. |