Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Notes on avoiding damage to ignition system | ||
Connect STAR DIAGNOSIS and read out fault memory | |||
| All electrical tests for the gasoline injection system ME-SFI engine 137 are described in Star Diagnosis. The following list contains the fault code description for the corresponding fault code. | ||
| ( display on the generic scan tool) | ||
Fault memory | |||
Fault code | Fault text | Possible cause/note | Remedy |
P2004 (P0100) | Hot film mass air flow sensor fault code description, ME-SFI | ||
P2007 (P0105) | Pressure sensor fault code description, ME-SFI | ||
P2006 (P0110) | Intake air temperature sensor fault code description, ME-SFI | ||
P2005 (P0115) | Coolant temperature sensor fault code description, ME-SFI | ||
P202D (P0125) | Coolant temperature sensor fault code description, ME-SFI | ||
P200F (P0130) | Lambdasensor signal fault code description, ME-SFI | Right lambdasensor, upstream of CAT for | |
cylinders 1 to 3 | |||
P2010 (P0136) | Lambdasensor signal fault code description, ME-SFI | Right lambdasensor, downstream of CAT | |
for cylinders 1 to 3 | |||
P2082 (P0130) | Lambdasensor signal fault code description, ME-SFI | Right lambdasensor, upstream of CAT for | |
cylinders 4 to 6 | |||
P2083 (P0136) | Lambdasensor signal fault code description, ME-SFI | Right lambdasensor, downstream of CAT | |
for cylinders 4 to 6 | |||
P20A9 (P0150) | Lambdasensor signal fault code description, ME-SFI | Left lambdasensor, upstream of CAT for | |
cylinders 7 to 9 | |||
P20AA (P0150) | Lambdasensor signal fault code description, ME-SFI | Left lambdasensor, upstream of CAT for | |
cylinders 10 to 12 | |||
P20AB (P0156) | Lambdasensor signal fault code description, ME-SFI | Left lambdasensor, downstream of CAT for | |
cylinders 7 to 9 | |||
P20AC (P0156) | Lambdasensor signal fault code description, ME-SFI | Left lambdasensor, downstream of CAT for | |
cylinders 10 to 12, | |||
P200E (-) | Lambdasensor signal fault code description, ME-SFI | Right lambdasensor, downstream of CAT for | |
cylinders 1 to 3, sensor status change | |||
P2081 (-) | Lambdasensor signal fault code description, ME-SFI | Right lambdasensor, downstream of CAT for | |
cylinders 4 to 6, sensor status change | |||
P20C6 (-) | Lambdasensor signal fault code description, ME-SFI | Right lambdasensor, downstream of CAT for | |
cylinders 7 to 9, sensor status change | |||
P20C7 (-) | Lambdasensor signal fault code description, ME-SFI | Right lambdasensor, downstream of CAT for | |
cylinders 10 to 12, sensor status change | |||
P207F (-) | Aging of lambdasensor upstream of CAT fault code description, ME-SFI | Right lambdasensor upstream of CAT for cylinders 4 to 6, correction variable exceeded | |
P20A5 (-) | Aging of lambdasensor upstream of CAT fault code description, ME-SFI | Left lambdasensor upstream of CAT for cylinders 7 to 9, | |
correction variable exceeded | |||
P20A6 (-) | Aging of lambdasensor upstream of CAT fault code description, ME-SFI | Left lambdasensor upstream of CAT for cylinders 10 to 12, correction variable exceeded | |
P200C (-) | Aging of lambdasensor upstream of CAT fault code description, ME-SFI | Right lambdasensor upstream of CAT for cylinders 1 to 3, correction variable exceeded | |
P2080 (P0133) | Aging of lambdasensor upstream of CAT fault code description, ME-SFI | Right lambdasensor upstream of CAT for cylinders 4 to 6, cycle duration too long | |
P20A7 (P0153) | Aging of lambdasensor upstream of CAT fault code description, ME-SFI | Left lambdasensor upstream of CAT for cylinders 7 to 9, | |
cycle duration too long | |||
P20A8 (P0153) | Aging of lambdasensor upstream of CAT fault code description, ME-SFI | Left lambdasensor upstream of CAT for cylinders 10 to 12, cycle duration too long | |
P200D (P0133) | Aging of lambdasensor upstream of CAT fault code description, ME-SFI | Right lambdasensor upstream of CAT for cylinders 1 to 3, cycle duration too long | |
P2008 (P0135) | Lambdasensor heater fault code description, ME-SFI | Right lambdasensor upstream of CAT for cylinders 1 to 3, internal resistance | |
P2009 (P0141) | Lambdasensor heater fault code description, ME-SFI | Right lambdasensor downstream of CAT for | |
cylinders 1 to 3, internal resistance | |||
P2088 (P0135) | Lambdasensor heater fault code description, ME-SFI | Right lambdasensor upstream of CAT for cylinders 4 to 6, internal resistance | |
P2089 (P0141) | Lambdasensor heater fault code description, ME-SFI | Right lambdasensor downstream of CAT for | |
cylinders 4 to 6, internal resistance | |||
P20B3 (P0155) | Lambdasensor heater fault code description, ME-SFI | Left lambdasensor, upstream of CAT for | |
cylinders 7 to 9, internal resistance | |||
P20B4 (P0155) | Lambdasensor heater fault code description, ME-SFI | Left lambdasensor, upstream of CAT for | |
cylinders 10 to 12, internal resistance | |||
P20B5 (P0161) | Lambdasensor heater fault code description, ME-SFI | Left lambdasensor, downstream of CAT for | |
cylinders 7 to 9, internal resistance | |||
P20B6 (P0161) | Lambdasensor heater fault code description, ME-SFI | Left lambdasensor, downstream of CAT for | |
cylinders 10 to 12, internal resistance | |||
P20BE (P0135) | Lambdasensor heater fault code description, ME-SFI | Right lambdasensor, upstream of CAT for | |
cylinders 1 to 3, power supply | |||
P20BF (P0135) | Lambdasensor heater fault code description, ME-SFI | Right lambdasensor, upstream of CAT for | |
cylinders 4 to 6, power supply | |||
P20C0 (P0155) | Lambdasensor heater fault code description, ME-SFI | Left lambdasensor, upstream of CAT for | |
cylinders 7 to 9, power supply | |||
P20C1 (P0155) | Lambdasensor heater fault code description, ME-SFI | Left lambdasensor, upstream of CAT for | |
cylinders 10 to 12, power supply | |||
P20C2 (P0141) | Lambdasensor heater fault code description, ME-SFI | Right lambdasensor downstream of CAT for | |
cylinders 1 to 3, power supply | |||
P20C3 (P0141) | Lambdasensor heater fault code description, ME-SFI | Right lambdasensor downstream of CAT for | |
cylinders 4 to 6, power supply | |||
P20C4 (P0161) | Lambdasensor heater fault code description, ME-SFI | Left lambdasensor, downstream of CAT for | |
cylinders 7 to 9, power supply | |||
P20C5 (P0161) | Lambdasensor heater fault code description, ME-SFI | Left lambdasensor, downstream of CAT for | |
cylinders 10 to 12, power supply | |||
P2018 (-) | Self-adjustment of mixture formation to limit value fault code description, ME-SFI | for cylinders 1 to 3, | |
Between idle speed and part load | |||
P2087 (-) | Self-adjustment of mixture formation to limit value fault code description, ME-SFI | for cylinders 4 to 6, | |
Between idle speed and part load | |||
P20B1 (-) | Self-adjustment of mixture formation to limit value fault code description, ME-SFI | for cylinders 7 to 9, | |
Between idle speed and part load | |||
P20B2 (-) | Self-adjustment of mixture formation to limit value fault code description, ME-SFI | for cylinders 10 to 12, | |
Between idle speed and part load | |||
P2017 (P0170) | Self-adjustment of mixture formation to limit value fault code description, ME-SFI | for cylinders 1 to 3, | |
AT IDLE | |||
P2086 (P0170) | Self-adjustment of mixture formation to limit value fault code description, ME-SFI | for cylinders 4 to 6, | |
AT IDLE | |||
P20AF (P0173) | Self-adjustment of mixture formation to limit value fault code description, ME-SFI | for cylinders 7 to 9, | |
AT IDLE | |||
P20B0 (P0173) | Self-adjustment of mixture formation to limit value fault code description, ME-SFI | for cylinders 10 to 12, | |
AT IDLE | |||
P2016 (P0170) | Self-adjustment of mixture formation to limit value fault code description, ME-SFI | for cylinders 1 to 3, | |
In the case of part load | |||
P2085 (P0170) | Self-adjustment of mixture formation to limit value fault code description, ME-SFI | for cylinders 4 to 6, | |
In the case of part load | |||
P20AD (P0173) | Self-adjustment of mixture formation to limit value fault code description, ME-SFI | for cylinders 7 to 9, | |
In the case of part load | |||
P20AE (P0173) | Self-adjustment of mixture formation to limit value fault code description, ME-SFI | for cylinders 10 to 12, | |
In the case of part load | |||
P201D (P0201) | Injection valves fault code description ME-SFI | Cylinder 1 | |
P2021 (P0202) | Injection valves fault code description ME-SFI | Cylinder 2 | |
P201F (P0203) | Injection valves fault code description ME-SFI | Cylinder 3 | |
P2022 (P0204) | Injection valves fault code description ME-SFI | Cylinder 4 | |
P201E (P0205) | Injection valves fault code description ME-SFI | Cylinder 5 | |
P2020 (P0206) | Injection valves fault code description ME-SFI | Cylinder 6 | |
P208A (P0207) | Injection valves fault code description ME-SFI | Cylinder 7 | |
P20BB (P0208) | Injection valves fault code description ME-SFI | Cylinder 8 | |
P20B9 (P0209) | Injection valves fault code description ME-SFI | Cylinder 9 | |
P20BC (P0210) | Injection valves fault code description ME-SFI | Cylinder 10 | |
P208B (P0211) | Injection valves fault code description ME-SFI | Cylinder 11 | |
P20BA (P0212) | Injection valves fault code description ME-SFI | Cylinder 12 | |
P2043 (P0300) | Misfire fault code description ME-SFI | Sum, emission limit | |
P2044 (P0301) | Misfire fault code description ME-SFI | Misfire at cylinder 1 | |
P2045 (P0305) | Misfire fault code description ME-SFI | Misfire at cylinder 5 | |
P2046 (P0303) | Misfire fault code description ME-SFI | Misfire at cylinder 3 | |
P2047 (P0306) | Misfire fault code description ME-SFI | Misfire at cylinder 6 | |
P2048 (P0302) | Misfire fault code description ME-SFI | Misfire at cylinder 2 | |
P2049 (P0304) | Misfire fault code description ME-SFI | Misfire at cylinder 4 | |
P204A (P0307) | Misfire fault code description ME-SFI | Misfire at cylinder 7 | |
P204B (P0311) | Misfire fault code description ME-SFI | Misfire at cylinder 11 | |
P204C (P0309) | Misfire fault code description ME-SFI | Misfire at cylinder 9 | |
P204D (P0312) | Misfire fault code description ME-SFI | Misfire at cylinder 12 | |
P204E (P0308) | Misfire fault code description ME-SFI | Misfire at cylinder 8 | |
P204F (P0310) | Misfire fault code description ME-SFI | Misfire at cylinder 10 | |
P2050 (P0300) | Misfire fault code description ME-SFI | Sum, harmful to CAT | |
P2051 (P0301) | Misfire fault code description ME-SFI | Misfire at cylinder 1 | |
P2052 (P0305) | Misfire fault code description ME-SFI | Misfire at cylinder 5 | |
P2053 (P0303) | Misfire fault code description ME-SFI | Misfire at cylinder 3 | |
P2054 (P0306) | Misfire fault code description ME-SFI | Misfire at cylinder 6 | |
P2055 (P0302) | Misfire fault code description ME-SFI | Misfire at cylinder 2 | |
P2056 (P0304) | Misfire fault code description ME-SFI | Misfire at cylinder 4 | |
P2057 (P0307) | Misfire fault code description ME-SFI | Misfire at cylinder 7 | |
P2058 (P0311) | Misfire fault code description ME-SFI | Misfire at cylinder 11 | |
P2059 (P0309) | Misfire fault code description ME-SFI | Misfire at cylinder 9 | |
P205A (P0312) | Misfire fault code description ME-SFI | Misfire at cylinder 12 | |
P205B (P0308) | Misfire fault code description ME-SFI | Misfire at cylinder 8 | |
P205C (P0310) | Misfire fault code description ME-SFI | Misfire at cylinder 10 | |
P2034 (P0335) | Crankshaft position sensor fault code description, ME-SFI | ||
P201A (P0341) | Camshaft Hall sensor fault code description, ME-SFI | Camshaft Hall sensor right cylinder bank | |
P20B8 (P0340) | Camshaft Hall sensor fault code description, ME-SFI | Camshaft Hall sensor left cylinder bank | |
P2003 (P0410) | Air injection malfunction (function chain) | Right cylinder bank, cylinders 1 to 6 | |
P20C9 (P0410) | Air injection malfunction (function chain) | Left cylinder bank, cylinders 7 to 12 | |
P200B (P0422) | Catalytic converter efficiency too low fault code description, ME-SFI | Catalytic converter for cylinders 1 to 3 | |
P207E (P0422) | Catalytic converter efficiency too low fault code description, ME-SFI | Catalytic converter for cylinders 4 to 6 | |
P20A3 (P0432) | Catalytic converter efficiency too low fault code description, ME-SFI | Catalytic converter for cylinders 7 to 9 | |
P20A4 (P0432) | Catalytic converter efficiency too low fault code description, ME-SFI | Catalytic converter for cylinders 10 to 12 | |
P2015 (P0440) | Purge system leaky (function chain) | Purge system leaking | |
P2013 (P0455) | Purge system leaky (function chain) | Major leak in purge system | |
P2014 (P0422) | Purge system leaky (function chain) | Purge system slightly leaky, fine leak | |
P2075 (P0442) | Purge system leaky (function chain) | Purge system slightly leaky, micro leak | |
P2026 (P0443) | Purge control valve fault code description, ME-SFI | ||
P2025 (P0446) | Activated charcoal canister shutoff valve fault code description, ME-SFI | Voltage supply | |
P2012 (P0446) | Activated charcoal canister shutoff valve fault code description, ME-SFI | Plausibility | |
P201C (P0450) | Tank pressure sensor fault code description, ME-SFI | Voltage supply | |
P2072 (P0450) | Tank pressure sensor fault code description, ME-SFI | Plausibility | |
P202B (P0507) | Idle speed control fault code description, ME-SFI | ||
P2069 (P0700) | Gear implausible or transmission leaky fault code description, ME-SFI | ||
P206A (P0700) | Command shift valve jamming in pressure position fault code description, ME-SFI | ||
P205E (P0702) | EGS control unit fault code description, ME-SFI | Internal fault | |
P2067 (P0705) | EGS control unit fault code description, ME-SFI | Selector lever module incorrectly coded | |
P2068 (P0720) | EGS control unit fault code description, ME-SFI | CAN message rear wheel speeds from ESP control unit missing or faulty | |
P20D5 (P0702) | EGS control unit fault code description, ME-SFI | The torque request from the EGS control unit is implausible | |
P20D6 (P0702) | EGS control unit fault code description, ME-SFI | CAN transmission error of torque request from EGS control unit | |
P20D7 (P0702) | EGS control unit fault code description, ME-SFI | CAN transmission error of torque request from EGS control unit | |
P2065 (P0702) | Valve supply voltage fault code description, ME-SFI | ||
P2066 (P0715) | Rpm sensor supply voltage and function fault code description, ME-SFI | ||
P20CA (P0500) | CAN fault detection fault code description, ME-SFI | Left rear wheel speed signal from ESP control unit | |
P20CB (P0500) | CAN fault detection fault code description, ME-SFI | Left front wheel speed signal from ESP control unit | |
P2031 (P0600) | CAN fault detection fault code description, ME-SFI | CAN message from steering column tube module | |
P202F (P0600) | CAN fault detection fault code description, ME-SFI | CAN message from ABC control unit | |
P2037 (P0600) | CAN fault detection fault code description, ME-SFI | CAN message from EGS control unit | |
P2030 (P0600) | CAN fault detection fault code description, ME-SFI | CAN message from electronic selector lever module control unit | |
P2036 (P0600) | CAN fault detection fault code description, ME-SFI | CAN message from ESP control unit | |
P20D1 (-) | CAN fault detection fault code description, ME-SFI | Torque request from DTR control unit implausible | |
P20D2 (-) | CAN fault detection fault code description, ME-SFI | CAN transmission error of torque request from DTR control unit | |
P20D3 (-) | CAN fault detection fault code description, ME-SFI | CAN transmission error of torque request from DTR control unit | |
P20D9 (-) | CAN fault detection fault code description, ME-SFI | Torque request from ESP control unit implausible | |
P20DA (-) | CAN fault detection fault code description, ME-SFI | CAN transmission error of torque request from ESP control unit | |
P20DB (-) | CAN fault detection fault code description, ME-SFI | CAN transmission error of torque request from ESP control unit | |
P20E4 (-) | CAN fault detection fault code description, ME-SFI | Implausible signal from brake light switch | |
P20E5 (-) | CAN fault detection fault code description, ME-SFI | CAN transmission error of signal from brake light switch | |
P20E6 (-) | CAN fault detection fault code description, ME-SFI | CAN transmission error of signal from brake light switch | |
P203E (P0600) | CAN fault detection fault code description, ME-SFI | CAN message from instrument cluster | |
P206D (P0730) | Gear comparison negative (several times) fault code description, ME-SFI | ||
P206B (P0740) | Torque converter lockup clutch fault code description, ME-SFI | ||
P2062 (P0743) | Torque converter lockup PWM solenoid valve fault code description, ME-SFI | ||
P2063 (P0748) | Modulating pressure control solenoid valve fault code description, ME-SFI | ||
P2064 (P0748) | Shift pressure control solenoid valve fault code description, ME-SFI | ||
P205F (P0753) | 1-2/4-5 shift solenoid valve fault code description, ME-SFI | ||
P2060 (P0758) | 2-3 shift solenoid valve fault code description, ME-SFI | ||
P2061 (P0763) | 3-4 shift solenoid valve fault code description, ME-SFI | ||
P2029 (P0340) | Camshaft timing (function chain) | Right cylinder bank | |
P202A (P0340) | Camshaft timing (function chain) | Left cylinder bank | |
P20CF (P0120) | Pedal value sensor fault code description, ME-SFI | Voltage difference between signal 1 and signal 2 | |
P20DC (P0120) | Pedal value sensor fault code description, ME-SFI | Open circuit at signal path 1 | |
P20DD (P0120) | Pedal value sensor fault code description, ME-SFI | Short circuit at signal path 1 | |
P20DE (P0120) | Pedal value sensor fault code description, ME-SFI | Open circuit at signal path 2 | |
P20DF (P0120) | Pedal value sensor fault code description, ME-SFI | Short circuit at signal path 2 | |
P20E3 (P0120) | Pedal value sensor fault code description, ME-SFI | Voltage supply for pedal value sensor | |
P2032 (P0120) | Throttle valve actuator fault code description, ME-SFI | Actual value potentiometer | |
P2097 (-) | Throttle valve actuator fault code description, ME-SFI | Throttle valve jammed, iced up | |
P202E (P0120) | Throttle valve actuator fault code description, ME-SFI | Adjustment | |
P209C (-) | Cylinder shutoff valves close with cylinder shutoff OFF, not fault code description, ME-SFI | Cylinder shutoff valve for | |
cylinders 7 to 9 | |||
P209D (-) | Cylinder shutoff valves close with cylinder shutoff OFF, not fault code description, ME-SFI | Cylinder shutoff valve for | |
cylinders 10 to 12 | |||
P20A2 (-) | One cylinder intake valve is not actuated on cylinder shutoff OFF fault code description, ME-SFI | ||
P208E (-) | Cylinder shutoff valve fault code description, ME-SFI | Cylinders 10 to 12, coil 1 | |
P208F (-) | Cylinder shutoff valve fault code description, ME-SFI | Cylinders 10 to 12, coil 2 | |
P2092 (-) | Cylinder shutoff valve fault code description, ME-SFI | Cylinders 7 to 9, coil 1 | |
P2093 (-) | Cylinder shutoff valve fault code description, ME-SFI | Cylinders 7 to 9, coil 2 | |
P209B (-) | Exhaust flap switchover valve fault code description, ME-SFI | ||
P2091 (P0520) | Cylinder shutoff oil pressure sensor fault code description, ME-SFI | ||
P201B (P0560) | Control unit power supply fault code description, ME-SFI | ||
P2039 (-) | Oil sensor fault code description, ME-SFI | Oil level implausible | |
P2040 (-) | Oil sensor fault code description, ME-SFI | Oil quality implausible | |
P2041 (-) | Oil sensor fault code description, ME-SFI | Water in engine oil | |
P2076 (-) | Oil sensor fault code description, ME-SFI | Oil temperature implausible | |
P2099 (-) | One cylinder exhaust valve is not actuated on cylinder shutoff OFF fault code description, ME-SFI | Cylinder 8 | |
P209A (-) | One cylinder exhaust valve is not actuated on cylinder shutoff OFF fault code description, ME-SFI | Cylinder 10 | |
P209E (-) | One cylinder exhaust valve is not actuated on cylinder shutoff OFF fault code description, ME-SFI | Cylinder 7 | |
P209F (-) | One cylinder exhaust valve is not actuated on cylinder shutoff OFF fault code description, ME-SFI | Cylinder 11 | |
P20A0 (-) | One cylinder exhaust valve is not actuated on cylinder shutoff OFF fault code description, ME-SFI | Cylinder 9 | |
P20A1 (-) | One cylinder exhaust valve is not actuated on cylinder shutoff OFF fault code description, ME-SFI | Cylinder 12 | |
P2098 (-) | Crash signal implausible fault code description, ME-SFI | ||
P207D (-) | EZS control unit fault code description, ME-SFI | ||
P203A (P0460) | Fuel tank fill level fault code description, ME-SFI | ||
P20CD (-) | Air conditioning system fault code description, ME-SFI | AC compressor torque implausible | |
P20CE (-) | Air conditioning system fault code description, ME-SFI | Refrigerant pressure in air conditioning too high | |
P20D0 (-) | Air conditioning system fault code description, ME-SFI | The air conditioning requests an implausible fan output | |
P20D8 (-) | ESP control unit fault code description, ME-SFI | ESP fault | |
P206E (-) | Transmission variant implausible fault code description, ME-SFI | Coded for MG, vehicle has AT | |
P206F (-) | Transmission variant implausible fault code description, ME-SFI | Incorrectly coded or fault in CAN communication with EGS control unit | |
P2070 (-) | Transmission variant implausible fault code description, ME-SFI | Undervoltage at EGS control unit | |
P20E7 (P0301) | Ionic current signal of one cylinder implausible fault code description, ME-SFI | Cylinder 1 | |
P20E8 (P0302) | Ionic current signal of one cylinder implausible fault code description, ME-SFI | Cylinder 2 | |
P20E9 (P0303) | Ionic current signal of one cylinder implausible fault code description, ME-SFI | Cylinder 3 | |
P20EA (P0304) | Ionic current signal of one cylinder implausible fault code description, ME-SFI | Cylinder 4 | |
P20EB (P0305) | Ionic current signal of one cylinder implausible fault code description, ME-SFI | Cylinder 5 | |
P20EC (P0306) | Ionic current signal of one cylinder implausible fault code description, ME-SFI | Cylinder 6 | |
P20F3 (P0307) | Ionic current signal of one cylinder implausible fault code description, ME-SFI | Cylinder 7 | |
P20F4 (P0308) | Ionic current signal of one cylinder implausible fault code description, ME-SFI | Cylinder 8 | |
P20F5 (P0309) | Ionic current signal of one cylinder implausible fault code description, ME-SFI | Cylinder 9 | |
P20F6 (P0310) | Ionic current signal of one cylinder implausible fault code description, ME-SFI | Cylinder 10 | |
P20F7 (P0311) | Ionic current signal of one cylinder implausible fault code description, ME-SFI | Cylinder 11 | |
P20F8 (P0312) | Ionic current signal of one cylinder implausible fault code description, ME-SFI | Cylinder 12 | |
P2023 (P0410) | Air injection relay fault code description, ME-SFI | ||
P2019 (-) | Coolant overheating protection fault code description, ME-SFI | ||
P2073 (-) | Electric fan fault code description, ME-SFI | ||
P2090 (-) | Connectors of lambdasensors swapped fault code description, ME-SFI | ||
P2033 (-) | Cruise control switch fault code description, ME-SFI | ||
P2042 (-) | Safety fuel shutoff detected fault code description, ME-SFI | ||
P202C (P0115) | Coolant thermostat fault code description, ME-SFI | ||
P20BD (P0378) | Angular deviation of camshaft relative to crankshaft fault code description, ME-SFI | Camshaft of left cylinder bank relative to crankshaft | |
P203D (P0370) | Angular deviation of camshaft relative to crankshaft fault code description, ME-SFI | Camshaft of right cylinder bank relative to crankshaft | |
P2024 (P0412) | Air pump switchover valve fault code description, ME-SFI | Right cylinder bank | |
P20C8 (P0415) | Air pump switchover valve fault code description, ME-SFI | Left cylinder bank | |
P2028 (P0340) | Camshaft adjustment valve fault code description, ME-SFI | Right cylinder bank | |
P208C (P0340) | Camshaft adjustment valve fault code description, ME-SFI | Left cylinder bank | |
P20ED (-) | Spark plug a or b of a cylinder fault code description, ME-SFI | Cylinder 1 | |
P20EE (-) | Spark plug a or b of a cylinder fault code description, ME-SFI | Cylinder 2 | |
P20EF (-) | Spark plug a or b of a cylinder fault code description, ME-SFI | Cylinder 3 | |
P20E0 (-) | Spark plug a or b of a cylinder fault code description, ME-SFI | Cylinder 4 | |
P20F1 (-) | Spark plug a or b of a cylinder fault code description, ME-SFI | Cylinder 5 | |
P20F2 (-) | Spark plug a or b of a cylinder fault code description, ME-SFI | Cylinder 6 | |
P20F9 (-) | Spark plug a or b of a cylinder fault code description, ME-SFI | Cylinder 7 | |
P20FA (-) | Spark plug a or b of a cylinder fault code description, ME-SFI | Cylinder 8 | |
P20FB (-) | Spark plug a or b of a cylinder fault code description, ME-SFI | Cylinder 9 | |
P20FC (-) | Spark plug a or b of a cylinder fault code description, ME-SFI | Cylinder 10 | |
P20FD (-) | Spark plug a or b of a cylinder fault code description, ME-SFI | Cylinder 11 | |
P20FE (-) | Spark plug a or b of a cylinder fault code description, ME-SFI | Cylinder 12 | |
P20D4 (-) | Load limitation active fault code description, ME-SFI | ||
P203B (P0221) | ME-SFI [ME] control unit fault code description, ME-SFI | Fault in function monitoring | |
P203C (P0221) | ME-SFI [ME] control unit fault code description, ME-SFI | Fault in function monitoring |