AR07.07-P-1454M | Remove hot film mass air flow sensor together with air intake pipe, install | 30.3.00 |
ENGINE 628.960
P07.07-2022-06
1 Hose clamp
2 Left air intake pipe
3 Connector
4 Hose clamp
5 Right air intake tube
6 Connector
B2/6 Left hot film MAF sensor
B2/7 Right hot film MAF sensor
| Remove, Install | ||
1 | Remove air cleaner | ||
2 | Separate plug connections (3, 6) at hot film mass air flow sensor on left (B2/6) and on right (B2/7) | ||
3 | Slacken hose clamps (1, 4) and pull off hot film mass air flow sensor on left (B2/6) and on right (B2/7) together with the air intake pipes (3, 5) | Ensure that the screws of the hose clamps (1, 4) are positioned as far as possible below the air intake pipes (3, 5) in the installed position otherwise these might strike the suspension strut mounts during load change reactions of the engine. | |
4 | Install in the reverse order |