1 | Heat shield |
2 | Electrical connection |
3 | Electrical wiring harness |
B19/11 | Temperature sensor upstream of ATL |
S07.04-4539-06
Danger ! | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
| Remove/install | ||
1 | Remove air-water duct | ||
2 | Remove heat shield (1) | Bolt/nut, heat shield for turbocharger to bracket | |
3 | Disconnect electrical connection (2) | ||
4 | Unhook electrical wiring harness (3) | Installation: Ensure the correct installation position of the electrical wiring harness (3). | |
5 | Remove temperature sensor upstream of ATL (B19/11) | ||
| Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | ||
Commercially available devices/tools | |||
Temperature sensor upstream of turbocharger | |||
6 | Install in the reverse order | ||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Check for leaktightness with engine running | Visual inspection only. |
Refererade dokument
- ah0000p001501cw Information om beräkning av åtdragningsmoment vid användning av insticks- eller fastsättningverktyg med olika verkningslängd
- ar8325s1402c
- as0000z000201a Risk för hud- och ögonskador vid hantering av heta eller glödande föremål.
- as0000z000501a Olycksrisk föreligger eftersom bilen kan komma i rullning när motorn är i gång. Risk för kläm- och brännskador vid ingrepp under startförloppet eller när motornär i gång.