Convert diesel particulate filter element – when converting to Euro 3 standard or no regulated emissions standard (countries without emissions legislation)

SM49.20-W-0010A

Convert diesel particulate filter element – when converting to Euro 3 standard or no regulated emissions standard (countries without emissions legislation)

14.03.2018

Engine

471.9 in model 963, 964

1

Diesel particulate filter element (with filter substrate)

2

Diesel particulate filter empty sleeve (filter substrate removed)

Pfeil

Holes

 Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

Remove diesel particulate filter

1.1

Remove diesel particulate filter

Vehicles with two exhaust temperature sensors downstream of diesel oxidation catalytic converter



AP49.10-W-4980H

1.2

Remove diesel particulate filter

Vehicles with one exhaust temperature sensor downstream of diesel oxidation catalytic converter



AP49.10-W-4980HA

Convert diesel particulate filter

2

Fully "hollow out" diesel particulate filter, i.e. remove its filter substrate

 It is recommended to make holes in the filter substrate first (arrow) and then to chisel out using a hammer drill.

Install diesel particulate filter empty sleeve (2)

3.1

Install diesel particulate filter empty sleeves (2)

Vehicles with two exhaust temperature sensors downstream of diesel oxidation catalytic converter



AP49.10-W-4980H

3.2

Install diesel particulate filter empty sleeves (2)

Vehicles with one exhaust temperature sensor downstream of diesel oxidation catalytic converter



AP49.10-W-4980HA