si4600p0001a

Service Information: Redocumentation of steering gear in VeDoc

Vrsta si · tema 46.00 · različica 0100 · 2011-08-15

Velja za: MODEL all

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 46 Krmilo › 46.00 Splošno — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

EinPAS 25 električno omrežje/omrežje/več funkcij › 25.15 omrežje/več funkcij › 25.15.20 kodiranje/parametriranje — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

EinPAS 45 podatki/informacije › 45.20 informacije/ukrepi › 45.20.20 servisne informacije — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

Velja tudi za motorje/menjalnike: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

SI46.00-P-0001A

Service Information: Redocumentation of steering gear in VeDoc

11.8.11

MODEL all

Service Information: Redocumentation of steering gear in VeDoc

P00.00-4765-08

Entry in VeDoc, shown with German menu interface

A Vehicles

B Major assemblies

C General

In accordance with ISO 9001 it is necessary for the traceability of safety-relevant components to be assured. For this reason, please remember that when the steering is replaced, that this also has to be redocumented in VeDoc similar to the procedural instruction for the engine and transmission (1200-17A handling engine-transmission numbers).

To this end, the steering number and the object number for the newly installed steering must be entered into VeDoc.

If you do not have write access to VeDoc to make the necessary entries, please contact your next higher-up organizational unit that has write access to VeDoc. It is to be notified in writing per fax or email about the scopes to be redocumented.