si3500p0005a

Service Information: Repair information on self-locking threaded connections at the axle mounts

Vrsta si · tema 35.00 · različica 0100 · 2008-11-12

Velja za: MODEL all

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 35 Zadnja prema › 35.00 Splošno — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

EinPAS 17 pogonski sklop/prema › 17.51 zadnja prema › 17.51.30 zadnja prema, celotna — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

EinPAS 45 podatki/informacije › 45.20 informacije/ukrepi › 45.20.20 servisne informacije — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

Velja tudi za motorje/menjalnike: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

SI35.00-P-0005A

Service Information: Repair information on self-locking threaded connections at the axle mounts

10.11.08

MODEL all

Service Information: Repair information on self-locking threaded connections at the axle mounts

P00.00-4397-11

Thread

Service Information: Repair information on self-locking threaded connections at the axle mounts

P00.00-4398-11

Thread cutters

Due to recent events, we again point out the importance of properly handling self-locking threaded connections.

In order to avoid consequential damage, self-locking screws/bolts (with microencapsulation) must ALWAYS be replaced. As described in the repair instructions, it is mandatory that the nut threads on the axle mount be recut and blown out with compressed air.

This is absolutely essential because adhesive residues in the thread make it impossible to achieve the required bolt prestress level, even if the specified tightening torque or angle is applied.

Failure to follow these instructions will result in insufficient prestress and the bolt will experience bending stress that could lead to breakage and great consequential damage.

Notes on self-locking nuts and bolts

All models

AH00.00-N-0001-01A

Povezani dokumenti