Subsequent conversion of Eberspächer Hydronic D5W Z heater booster to stationary heater

AZ83.70-D-0010A

11.2.00

MODELS 901, 902, 903, 904, 905 with CODE (HZ9) Heater booster, diesel engine

D83.70-1134-12

1 Timer

2 Stationary heater control unit with wiring harness

Modification notes

16.7.02

Connection for actuating the electrical circulation pump modified.

Steps 2 to 6

	Remove
1	Disconnect ground cable of battery
2.1	Detach cover of the side access opening on the driver's seat box	with ATA [anti-theft alarm system] code FY1 or FZ4
3.1	Detach door sill molding from driver door	with ATA code FY1 or FZ4
4.1	Loosen floor covering in driver's footwell from wheelhouse and put to one side	with ATA code FY1 or FZ4
5	Remove air conditioning pushbutton control module
		without Heizmatik or Tempmatik code H25 or HH9	AR83.25-D-1124B
		with Heizmatik or Tempmatik code H25 or HH9	AR83.25-D-1124A
	Install
6	Install timer on the instrument panel	Models 901.3/4, 902.3/4, 903.3/4, 904.3/4	AZ83.70-D-0001-07B
		Models 901.6, 902.6, 903.6, 904.6. 905.6	AZ83.70-D-0001-07C
7	Install stationary heater control unit		AZ83.70-D-0010-01A
8	Connecting stationary heater control module	without Heizmatik or Tempmatik code H25 or HH9	AZ83.70-D-0010-02A
		with Heizmatik or Tempmatik code H25 or HH9	AZ83.70-D-0010-02B
9	Fit remaining parts to vehicle
 Danger!	Risk of explosion from fuel vapors, risk of poisoning from inhaling combustion gases and risk of injury from burns during and after operation of heater unit	Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or while filling fuel tank. Allow heater unit to cool down after operation and wear protective gloves.	AS83.70-Z-0002-01A
10	Switch on stationary heater in accordance with the manufacturer's documents and carry out function check
	Notes on retrofitting stationary heater with fuel combustion		AH83.70-N-0001-05A

Parts ordering notes

Part no.	Designation	Quantity
B6 656 0168	Heater booster set up kit	1