ar8325d1124b

Remove and install air conditioning pushbutton control module

Vrsta ar · tema 83.25 · različica 0103 · 2002-03-14

Velja za: MODELS 901.6, 902.6, 903.6, 904.6, 905.6 except CODE (H25) Automatic heater control "Heatmatic" except CODE (HH9) Automatic air conditioning "Tempmatic" MODEL 690.6 except CODE (HH9) Automatic air conditioning "Tempmatic"

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 83 Klimatizacija › 83.25 Samodejno ogrevanje — Serija 690 (modeli 6**) · Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

EinPAS 39 gretje/zračenje/hlajenje › 39.15 klimatizacija › 39.15.11 krmilnik/rele — Serija 690 (modeli 6**) · Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

EinPAS 39 gretje/zračenje/hlajenje › 39.15 klimatizacija › 39.15.33 enota za upravljanje/potezalo — Serija 690 (modeli 6**) · Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

AR83.25-D-1124B

Remove and install air conditioning pushbutton control module

3.9.99

MODELS 901.6, 902.6, 903.6, 904.6, 905.6
except CODE (H25) Automatic heater control "Heatmatic"
except CODE (HH9) Automatic air conditioning "Tempmatic"

MODEL 690.6 except CODE (HH9) Automatic air conditioning "Tempmatic"

Remove and install air conditioning pushbutton control module

D83.20-1102-11

1 Air conditioning pushbutton control module

2 Pull wire

3 Pull wire

4 Connector

5 Pull wire

6 Screw

7 Bracket

Remove, Install

1.1

Remove stowage compartment below pencil holder

For version without tachograph, without code.

1.2

Remove tachograph

For version with tachograph,
Code J19/J05.

AR54.30-D-0001A

2

Remove cover on center part of instrument panel

AR68.10-D-1190A

3

Unscrew bolts (6)

4

Identify cables (2, 3 and 5) and remove from the air conditioning pushbutton control module (1)

Installation: The cable for the lower adjusting lever must be attached to the front adjusting knurl of the control and operating module for the climate control.

5

Pull out plug (4)

6

Unscrew bracket (7) on both sides

Only if the control and operating module for climate control is replaced.

7

Install in the reverse order

Povezani dokumenti