Deployment of airbag units when no deployment device is present

AR91.60-D-0611-05A	Deployment of airbag units when no deployment device is present
 Warning	Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.Model 901, 902, 903, 904, 905Nicht gültig für die Länder A, CH, D	AS91.00-Z-0001-01D
 Warning	Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.Model 415, 447, 636, 639, 900, 906, 909Nicht gültig für die Länder A, CH, D	AS91.00-Z-0001-01A
Topical note	Notes on controlled deployment of airbag, sidebag and emergency tensioning retractor units		AH91.60-P-0611-02P
	Ignition cable for firing airbag and seat belt tensioner units		WF58.50-P-9160-02A

Model	415, 447, 636, 639, 900, 901, 902, 903, 904, 905, 906, 909
	Not valid for countries A, CH, D

Use of self-fabricated ignition line

1	Fabricate ignition line with a length of at least 10 m with pressure switch.

2	Connect 2-pin plug connection to squib of airbag unit to be scrapped.

 Maintain safe distance of at least 10 m from airbag unit to be scrapped.

3	Connect ignition line to battery.

4	Press both pushbuttons simultaneously.

 For airbag units with 2 squibs, both squibs must be deployed. To do so, repeat operation steps 2 to 4 after plugging the ignition line into the second squib.

Povezani dokumenti