Deployment of removed airbag units

AR91.60-D-0611-02A

Deployment of removed airbag units

 Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.Model 901, 902, 903, 904, 905Nicht gültig für die Länder A, CH, D

AS91.00-Z-0001-01D

 Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.Model 415, 447, 448, 636, 639, 906, 909Nicht gültig für die Länder A, CH, D

AS91.00-Z-0001-01A

Topical note

Notes on controlled deployment of airbag, sidebag and emergency tensioning retractor units

AH91.60-P-0611-02P

Model

415, 447, 448, 636, 639, 900, 901, 902, 903, 904, 905, 906, 909

Not valid for countries A, CH, D

2

Pressure switch, battery control

3

Pressure switch, deployment

4

Rotary switch

5

Deployment indicator lamp

7

Plug connector, adapter cable

8

2-pin plug connector

1

Plug 2-pin plug connection (8) into squib of airbag unit to be scrapped.

 Maintain safe distance of at least 10 m to airbag unit to be scrapped.

2

Move rotary switch (4) to position "1".

3

Press the battery control pressure switch (2) and deployment pressure switch (3) simultaneously.

 After a successful ignition, the deployment indicator lamp (5) lights up.

 For airbag units with 2 squibs, both squibs must be deployed. To do so, repeat operation steps 1 to 3 after plugging the ignition line into the second squib.