AR83.70-W-5302E | Remove/install heater unit | 20.11.00 |
MODELS 950.###, 952.###, 953.###, 954.### ## as of 546798 with BODY 942.899
with CODE (F04) Cab L (long)
with CODE (F05) M-cab (medium-long)
with CODE (F15) MEGASPACE cab
with CODE (H61) "Webasto" Air Top 2000 hot air auxiliary heater
W83.70-1155-06
1 Heater unit
2 Plug connection
3 Fuel pipe
| Remove/Install | ||
1 | Disconnect ground lead from battery | Not when heating or in the run-on phase. | |
2 | Move floor mat to side behind left seat | ||
3 | Detach connector (2) from heater unit (1) | ||
4 | Detach heater unit (1) from cab floor | Do not raise heater unit by more than 15 cm with fuel line attached. | |
Installation: Replace sealing profile between heater unit and cab floor. | |||
| |||
5 | Remove fuel line (3) at heater unit (1) | Do not kink fuel line. | |
6 | Remove fuel line bracket (3) from fresh air supply pipe | ||
7 | Remove heater unit (1) | Do not damage plug and cable. | |
8 | Install in the reverse order | ||
Danger! | Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit | Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or when refueling. Allow heater unit to cool down after operation and wear protective gloves. | |
9 | Check function of stationary heater |
Stationary heater unit