Shown with engine 699.301 |
1 | Condenser |
2 | Radiator |
3 | Screw |
4 | Electrical connector |
5 | Screw |
6 | Refrigerant lines |
S83.25-4539-06
Warning | Risk of poisoning caused by inhaling overheated refrigerant vapors from an air conditioning system containing R134a. Risk of injury to skin and eyes caused by contact with liquid R134a refrigerant and when working on pressurized parts | Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Protect air conditioning circuit and components from moisture when carrying out repair work | ||
Notes on handling refrigerant R134a | |||
| Remove/install | ||
1 | Discharge air conditioning system. | ||
2 | Remove refrigerant lines (6) from condenser (1). | ||
| Compressor oils (specification 362.1) | ||
| |||
Remove screw/bolt (5) to do this. | |||
Installation: Replace sealing rings and moisten with compressor oil. | |||
Bolt, refrigerant line to condenser | |||
Record plug | |||
3 | Disconnect electrical connection (4). | ||
4 | Remove upper front crossmember. | ||
5 | Remove additional cooler. | Model 470 with engine 699.304/305 | |
Do not remove coolant hoses. | |||
6 | Remove automatic transmission oil cooler from condenser (1). |
| |
Do not remove oil hoses. | |||
7 | Remove bolt (3) . | M6 | |
8 | Detach condenser (1) from cooler (2). | ||
9 | Remove condenser (1). | | |
10 | Install in the reverse order. |
129 589 00 91 00
Record plug