ar8230d7700a

Remove/install rain sensor

Vrsta ar · tema 82.30 · različica 0102 · 2003-09-15

Velja za: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 82 Električni sistem, nadgradnja › 82.30 Brisalniki — Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

EinPAS 36 vidljivost › 36.30 brisanje/pranje › 36.30.12 senzor/stikalo/kabelski snop — Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

AR82.30-D-7700A

Remove/install rain sensor

11.9.02

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor

Remove/install rain sensor

D82.30-0017-06

1 Mirror

2 Cover

3 Mirror arm

4 Cover

5 Rain sensor

6 Felt strip (anti-rattle)

7 Plug-in wiring plug connection

8 Hinge (sun visor)

Remove/Install

1

Disconnect and remove both covers (2)

2

Press mirror arm (3) down off the mirror base parallel to the windshield

To facilitate disassembly, lift up the retaining collar (arrow) slightly using a screwdriver (reduction in breakaway torque).

3

Separate and remove covers (4)

4

Loosen both inner hinges (8) of the sun visors

5

Raise headliner at the front and remove cable strands

6

Pull off felt strip (protection against rattling) (6)

7

Unplug electrical connector (7)

8

Remove rain sensor (5)

Do not touch the gel-like sensor surface of the rain sensor, otherwise its function is impaired or the rain sensor becomes unusable.

10

Install in the reverse order

11

Check for proper function