Remove/install operating lever for engine control and continuous brake

Vrsta ar · tema 54.25 · različica 0200 · 2012-03-08

Velja za: MODEL 950, 952, 953, 954 with BODY 940.899, 942.899 MODEL 970, 972, 974, 975, 976 with BODY 972.899

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

AR54.25-W-2805B

21.2.12

MODEL 950, 952, 953, 954 with BODY 940.899, 942.899

MODEL 970, 972, 974, 975, 976 with BODY 972.899

W54.25-1004-01

1 Screw

S2 Engine control/permanent brake operating lever

Modification notes

16.2.12

Work procedure completely modified

 	Remove/install
	Notes on working on the steering system in vehicles with airbag		AH46.00-N-0001-01A
1	Remove steering wheel		AR46.10-W-0100A
2	Remove clock spring contact		AR46.10-W-0200A
3	Remove cover in left footwell	Model 950.0/1/2/3, 952.0/1/2, 953.1/3, 954.0/1/2	AR68.30-W-1310A
		Model 950.5/6, 952.5/6, 953.6, 954.5, 970, 972, 974, 975, 976	AR68.30-W-1310B
4	Detach cover from steering column
5	Disconnect connector of engine control/permanent brake operating lever (S2) in footwell of driver	 Installation: Route connection lines of engine control/permanent brake operating lever (S2) free of chafing with cable tie.
6	Remove engine control/permanent brake (S2)
7	Install in the reverse order