Remove/install clock spring contact

Vrsta ar · tema 46.10 · različica 0300 · 2012-02-29

Velja za: MODEL 375, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 958, 970, 972, 974, 975, 976

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

AR46.10-W-0200A

24.2.12

MODEL 375, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 958, 970, 972, 974, 975, 976

W46.10-1025-05

Illustrated on model 934

1 Cover

2 Bolts

3 Electrical connector (footwell)

A112 Clock spring contact

Modification notes

20.2.12

Work procedure completely revised.

 	Remove/install
	Notes on working on the steering system in vehicles with airbag		AH46.00-N-0001-01A
1	Switch off ignition
2	Remove steering wheel		AR46.10-W-0100A
3	Remove cover in left footwell	 Only the left-hand part of the cover.
4	Disconnect electrical connector (3) of clock spring contact (A112)	 Installation: Use new cable ties.
5	Remove trim (1) of steering column
6	Remove bolts (2)	 The bolts (2) are used to secure the clock spring contact (A112) together with a steering wheel angle sensor (B68) (if installed) to the steering column.
7	Lift off clock spring contact (A112)	 Remove the clock spring contact (A112) carefully so that the installation position of the steering wheel angle sensor (B68) (if installed) is not changed.
8	Install in the reverse order