Remove/install purge control valve

Vrsta ar · tema 47.30 · različica 0101 · 2004-04-15

Velja za: ENGINE 111.984 in MODELS 901.6, 902.6, 903.6, 904.6

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 1 Motor › 47 Sistem za dovod goriva, napajanje z energijo, pogonski sklop › 47.30 Naprava za izhlapevanje goriva — Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**)

EinPAS 16 dovajanje goriva/napajanje z energijo, motor › 16.10 dovajanje goriva › 16.10.13 napeljava/gibka cev/ventil — Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**)

Velja tudi za motorje/menjalnike: 111 984

AR47.30-D-8220A

Remove/install purge control valve

23.8.99

ENGINE 111.984 in MODELS 901.6, 902.6, 903.6, 904.6

D47.30-1102-12

1 Connector

2 Purge control valve

3 Line of switchover valve/idle speed control actuator

4 Line of switchover valve/activated charcoal canister

 	Remove/Install
1	Remove air intake hose		AR09.10-D-8030F
2	Remove the connector (1) at the purge control valve (2)
3	Detach lines (3 and 4) from purge control valve
4	Take off the purge control valve (2) from the bracket in the upward direction	 Installation: While connecting the switchover valve, pay attention to the marking "MOT" on the housing. The arrow must point to the idle speed control actuator.
5	Install in the reverse order