ar3530s011601e
Detach, attach and secure hexagon collar nut of rear axle shaft
Vrsta ar · tema 35.30 · različica 0200 · 2020-01-28
Velja za: Model 447 with engine 274, 651 Model 447 with engine 654.9 Model 448 with engine 274
Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.
Umestitev
Funkcijska skupina 2 Podvozje › 35 Zadnja prema › 35.30 Pogon, pogonske gredi — Serija 447 · Serija 448 · Serija 651 · Serija 654 (modeli 9**)
EinPAS 17 pogonski sklop/prema › 17.51 zadnja prema › 17.51.51 polgred/pogonska gred — Serija 447 · Serija 448 · Serija 651 · Serija 654 (modeli 9**)
Velja tudi za motorje/menjalnike: 274 ***
AR35.30-S-0116-01E
| Detach, attach and secure hexagon collar nut of rear axle shaft
|
|
|
Topical note
| Notes on threaded connections fastened using a tightening angle-based tightening process
|
| AH00.00-P-0020-01A
|
Model
| 447 with engine 274, 651
|
Model
| 447 with engine 654.9
|
Model
| 448 with engine 274
|
27.01.2020
| Collar nut, rear axle shaft to wheel hub
|
| BA35.30-N-1001-01E
|
Number
| Designation
|
|
| Model 447, 448
|
BA35.30-N-1001-01E
| Collar nut, rear axle shaft to wheel hub
| Stage 1
| Nm
| 250
|
|
|
| Loosen
| °
| 180
|
|
|
| Stage 2
| Nm
| 200
|
|
|
| Stage 3
| °
| 30
|
Remove
1
| Bend up lock tabs (arrows) and unscrew collared nut (1).
|
|
| The vehicle may not be moved on its wheels when the collar nuts (1) are unfastened.
Otherwise the wheel bearings may be damaged.
|
Install
2
| Screw on collar nut (1) .
|
|
| Always replace collar nut (1).
Otherwise the collar nut (1) cannot be properly secured.
|
Lock
3
| Press collar (3), as shown, into notches of rear axle shaft (4).
|
|
| There may not be any gap left between the notches and the lock tabs.
|
4
| Paint match marks on the locked collar nut (1) and the rear axle shaft (4).
|
Povezani dokumenti
