Vrsta ar · tema 35.30 · različica 0105 · 2001-07-24
Velja za: REAR AXLE 741.130 /131 /40 /43 /52 /530 /540 /55 except CODE (A71) Rear axle with differential lock REAR AXLE 741.407 with CODE (A71) Rear axle with differential lock except CODE (AC7) Rear axle ratio i = 3.272 except CODE (AE1) Rear axle ratio i = 2.923 REAR AXLE 741.406 /437 with CODE (A71) Rear axle with differential lock REAR AXLE 741.130 /408 /409 in MODEL 690.6 except CODE (A71) Rear axle with differential lock
Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.
Umestitev
Funkcijska skupina 2 Podvozje › 35 Zadnja prema › 35.30 Pogon, pogonske gredi — Serija 690 (modeli 6**)
EinPAS 17 pogonski sklop/prema › 17.51 zadnja prema › 17.51.65 gonilo zadnje preme/medosno gonilo — Serija 690 (modeli 6**)
Velja tudi za motorje/menjalnike: 741 130, 741 131, 741 40*, 741 406, 741 407, 741 408, 741 409, 741 43*, 741 437, 741 52*, 741 530, 741 540, 741 55*
AR35.30-D-4815-02A
Measuring basic dimension on differential
601 589 00 21 00
Adjustment device
D35.30-0072-01
AMeasuring internal dimension of axle housing
1 Install measuring device (02) in rear axle housing and measure gap using feeler gauge (a).
2 Determine internal dimension of housing and note measurement. The internal dimension is calculated by adding the size of the special tool and the measurement for the gap.
Example: Special tool size 163.8 mm
Feeler gauge gap 1.1 mm
Internal housing dimension164.9 mm
D35.30-0073-01
BMeasuring differential
1 Place differential on a level surface with one 5mm thick shim at the top and another at the bottom, and meaasure the overall height (arrows).
Example: Differential measured with shims 164.1 mm
