Modification notes
Automatic transmission complete
Number | Designation | Transmission 722.683/684/ | Transmission | ||
BA27.10-N-1005-04B | Oil drain screw to oil pan | Nm | 22 | 22 | |
Torque converter
Number | Designation | Model | ||
BA27.20-N-1005-01C | Oil drain bolt to torque converter | Nm | 8 | |
651 589 08 40 00
Ratchet box wrench
Counterholder
Counterholder
Drain plate
651 589 00 40 00
906 589 00 03 00
906 589 08 63 00
Use counterholder 651 589 00 40 00 for engine 651 with code (H08) High-performance air conditioning or with code (HK4) Rear air conditioning, uprated
Use counterholder 651 589 08 40 00 for engine 651 without code (H08) High-performance air conditioning or without code (HK4) Rear air conditioning, uprated
D27.00-1105-09
1 Remove plug (2).
2 Crank engine at crankshaft, until the oil drain screw (3) can be accessed through the opening on the transmission.
On engine 651 use counterholder for cranking.
3 Position drain plate (4) under the oil drain screw (3).
4 Remove oil drain screw (3) with ratchet-ring wrench and drain gear oil from torque converter.
Collect gear oil in a suitable container.
5 Remove oil drain screw (1) and drain gear oil from oil pan.
Collect gear oil in a suitable container.
6 Tighten oil drain screw (1).
Replace sealing ring. Observe tightening torque for oil drain screw (1). Clean drain position using rags.
7 remove drain plate (4).
8 Tighten oil drain screw (3) using ratchet-ring wrench.
Replace sealing ring. Observe tightening torque for oil drain screw (3). Clean drain position using rags.