ap3520p3552b

Check condition of rear axle and rear axle ball joints

Vrsta ap · tema 35.20 · različica 0101 · 2015-02-09

Velja za: MODEL 117, 156, 176, 242, 246

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 35 Zadnja prema › 35.20 Obese koles, pesto — Serija 117 · Serija 156 · Serija 176 · Serija 242 · Serija 246

EinPAS 17 pogonski sklop/prema › 17.51 zadnja prema › 17.51.30 zadnja prema, celotna — Serija 117 · Serija 156 · Serija 176 · Serija 242 · Serija 246

AP35.20-P-3552B

Check condition of rear axle and rear axle ball joints

6.11.14

MODEL

117, 156, 176, 242, 246

Check condition of rear axle and rear axle ball joints

Shown on model 246 without code M005 (4MATIC)

1

Spring control arm elastomer bearing

2

Tie rod elastomer bearing

P35.20-2334-06

Check condition of rear axle and rear axle ball joints

Shown on MODEL 117 without CODE M005 (4MATIC)

3

Trailing arm elastomer bearing

4

Stabilizer bar mounting

6

Camber strut elastomer bearing

7

Rear axle carrier elastomer bearing

12

Rear axle level sensor

P35.20-2336-06

Check condition of rear axle and rear axle ball joints

P35.10-2470-09

Shown on model 246 without code M005 (4MATIC)

4

Stabilizer elastomer bearing

5

Shift rail elastomer bearing

Check condition of rear axle and rear axle ball joints

Shown on MODEL 176 with CODE M005 (4MATIC)

8

Rear axle differential elastomer bearing

P35.20-2333-06

Check condition of rear axle and rear axle ball joints

P41.10-2407-09

Shown on MODEL 176 with CODE M005 (4MATIC)

9

Outer propeller shaft boot

11

Clamps

10

Inner propeller shaft boot

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Danger !

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating range of the mechanism when moving components.

AS00.00-Z-0009-01A

Preparatory tasks

1

Release parking brake

2

Lift vehicle on vehicle lift

AR00.60-P-1000AK

Remove

3

Remove rear underfloor paneling

MODEL 242.890

AR61.30-P-1001NKB

Check

4

Check wheel bearing by firmly pulling, pushing and turning the wheels

If there are problems:

Repair the problem, subject to separate repair order.

5

Check spring control arm elastomer bearing (1) for cracks, deformation and wear, and for play by firmly tugging and pushing

If there are problems:

Repair the problem, subject to separate repair order.

6

Check tie rod elastomer bearing (2) for cracks, deformation and wear, and for play by firmly tugging and pushing

If there are problems:

Repair the problem, subject to separate repair order.

7

Check trailing arm elastomer bearing (3) for cracks, deformation and wear, and for play by firmly tugging and pushing

If there are problems:

Repair the problem, subject to separate repair order.

8

Check rear axle level sensor (12), linkage, ball heads and sensor for correct seating, cracks, deformation, corrosion and play

Vehicles with level sensor

If there are problems:

Repair the problem, subject to separate repair order.

9

Check stabilizer bushing (4) for cracks, deformation and wear and for play by firmly tugging and pushing

If there are problems:

Repair the problem, subject to separate repair order.

10

Check shift rail elastomer bearing (5) for cracks, deformation and wear, and for play by firmly tugging and pushing

If there are problems:

Repair the problem, subject to separate repair order.

11

Check camber strut elastomer bearing (6) for cracks, deformation and wear, and for play by firmly tugging and pushing

If there are problems:

Repair the problem, subject to separate repair order.

12

Check rear axle differential elastomer bearing (7) for cracks, deformation and wear

If there are problems:

Repair the problem, subject to separate repair order.

13

Check rear axle carrier (7) for cracks, deformation and corrosion

If there are problems:

Repair the problem, subject to separate repair order.

14

Check elastomer bearing for rear axle differential (8) for cracks, deformation and wear

If there are problems:

Repair the problem, subject to separate repair order.

15

Check outer drive shaft boots (9) for condition, leaktightness and correct seating.

If there are problems:

Repair the problem, subject to separate repair order.

16

Check inner drive shaft boots (10) for condition, leaktightness and correct seating.

If there are problems:

Repair the problem, subject to separate repair order.

17

Check clamps (11) of drive shaft boots for condition and seating

If there are problems:

Repair the problem, subject to separate repair order.

Install

18

Install rear underfloor paneling

MODEL 242.890

AR61.30-P-1001NKB

Concluding tasks

19

Lower vehicle with lifting platform

AR00.60-P-1000AK

Povezani dokumenti