1 | Lower elastomer bearing |
2 | Lower supporting ball joint boot |
3 | Lower supporting ball joint |
4 | Shift rail joint sleeve |
5 | Shift rail joint |
6 | Lower wishbone control arm |
11 | Shift rail |
P33.10-2453-05
P33.10-2454-08
4 | Shift rail joint boots | 8 | Upper supporting joint | |
5 | Shift rail joints | 9 | Upper supporting ball joint boot | |
7 | Upper elastomer bearing | 10 | Upper wishbone control arm |
Danger ! | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating range of the mechanism when moving components. | |
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Preparatory activity | |||
1 | Lift vehicle on vehicle lift | ||
| |||
| Check | ||
2 | Check underfloor paneling for evidence of driving over obstacles or damage caused by contact with the vehicle underside | If the underfloor paneling is damaged: | |
| |||
Rectify problem subject to separate repair order. | |||
| Remove | ||
3 | Remove front engine compartment paneling and loosen center engine compartment paneling | ||
| |||
| Check | ||
4 | Check wheel bearing by firmly pulling, pushing and turning the wheels | If there are problems: | |
| |||
Rectify problem subject to separate repair order. | |||
5 | Check front axle carrier for cracks, deformation and corrosion | If there are problems: | |
| |||
Rectify problem subject to separate repair order. | |||
6 | Check lower elastomer bearings (1) of lower wishbone control arms (6) for cracks, deformation and wear and check for play by pulling and pressing firmly | If there are problems: | |
| |||
Rectify problem subject to separate repair order. | |||
7 | Check lower supporting ball joint boots (2) for condition, leaktightness and correct seating | If there are problems: | |
| |||
Rectify problem subject to separate repair order. | |||
8 | Check lower supporting ball joints (3) for play by pulling and pressing firmly on the lower wishbone control arm (6) | If there are problems: | |
| |||
Rectify problem subject to separate repair order. | |||
9 | Check shift rail joint boots (4) for proper condition, leaktightness and correct seating | If there are problems: | |
| |||
Rectify problem subject to separate repair order. | |||
10 | Check coupling rod joints (5) for play by firmly pulling and pushing shift rails (11) | If there are problems: | |
| |||
Rectify problem subject to separate repair order. | |||
11 | Check upper elastomer bearings (7) of upper wishbone control arms (10) for cracks, deformation and wear and check for play by pulling and pressing firmly | If there are problems: | |
| |||
Rectify problem subject to separate repair order. | |||
12 | Check upper supporting ball joint boots (9) for condition, leaktightness and correct seating | If there are problems: | |
| |||
Rectify problem subject to separate repair order. | |||
13 | Check upper supporting ball joints (8) for play by pulling and pressing firmly on the upper wishbone control arm (10) | If there are problems: | |
| |||
Rectify problem subject to separate repair order. | |||
| Install | ||
14 | Install front engine compartment paneling and secure center engine compartment paneling | ||
| |||
Finishing activity | |||
15 | Lower vehicle |