ad8035d200305a

Notes on DTC memory, IMM

Vrsta ad · tema 80.35 · različica 0100 · 2003-06-12

Velja za: MODEL 901, 902, 903, 904 with ENGINE 111, 601, 602 with CODE (FZ7) Immobilizer

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 80 Centralno zaklepanje, komfortno upravljanje, sistemi za avtorizacijo › 80.35 Radijski daljinski upravljalnik — Serija 601 · Serija 602 · Serija 901 · Serija 902 · Serija 903 · Serija 904

EinPAS 29 sistem za avtorizacijo vožnje/varnostni sistem › 29.25 avtorizacija vožnje › 29.25.1 osnovne informacije — Serija 601 · Serija 602 · Serija 901 · Serija 902 · Serija 903 · Serija 904

Velja tudi za motorje/menjalnike: 111 ***

AD80.35-D-2003-05A

Notes on DTC memory, IMM

Notes on DTC memory

After calling the menu point "DTC memory", the numbers for the DTCs stored in the control module appear together with the associated texts.

Current faults are displayed with a black background on the HTT.

Stored faults are displayed without black background on the HTT.

Procedure for current faults

Proceed as described in the Test program for the electrical system.

Procedure for stored faults:

Erase DTC memory. Activate and deactivate system. Read out DTC memory again.

If the fault is stored again, proceed as described in the test program for the electrical system.

Stored DTCs can be read out with the HHT connected to the data link connector with ignition "ON":