ar7730p3355qa

Remove, install rear soft top seal on soft top compartment lid

Тип ar · тема 77.30 · версия 0103 · 2010-03-26

Применимость: MODEL 207.4, 209.4

Нет на языке «ru»; показано на языке Английский.

Расположение

Функциональная группа 3 Кузов › 77 Сдвижной люк, складной верх, навесные элементы › 77.30 Складной жёсткий / мягкий верх в целом — Серия 207 (модели 4**) · Серия 209 (модели 4**)

EinPAS 38 Складной верх / сдвижной люк › 38.20 Мягкий складной верх / крыша купе / жесткий складной верх › 38.20.29 Короб складного верха — Серия 207 (модели 4**) · Серия 209 (модели 4**)

.

AR77.30-P-3355QA

Remove, install rear soft top seal on soft top compartment lid

16.3.10

MODEL 207.4, 209.4

Remove, install rear soft top seal on soft top compartment lid

P68.30-2673-09

Shown on model 209.4, on left side of vehicle

1 Rear seal

2 Main pillar

5 Soft top bow

3 Bolts

4 Terminal strip

Remove

Danger!

Risk of injury when performing check and repair work in area of roll bar

Before working in the area of the roll bar, pull out the rear head restraints by hand.

Keep body parts out of the area where the roll bar extends.

AS91.00-Z-0003-01QA

Danger!

Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities

No parts of the body or limbs should be within the operating range of the mechanism when moving components.

AS00.00-Z-0009-01A

Danger!

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.

Deburr repair panels.

AS00.00-Z-0017-01A

1

Put up front soft top

2

Pull rear seal (1) out of roof frame profile on main pillar (2) on left and right

3

Put up soft top bow (5)

Front soft top frame fold towards front.

4

Loosen bolts (3) on soft top bow (5) so that the rear seal (1) can be pulled out between clamping strip (4) and soft top bow (5)

5

Pull out rear seal (1) between terminal strip (4) and soft top bow (5).

Carefully pull out rear seal (1), rear seal (1) can tear.

Install

6

Put up front soft top

Soft top bow (5) lowers.

7

Coat rear seal (1) with lubricant

*BR00.45-Z-1010-06A

8

Install rear seal (1) in clamping channel of left upper main pillar (2) and press in.

9

Put up soft top bow (5)

Front soft top frame fold towards front.

10

Press in rear seal (1) between clamping strip (4) and soft top bow (5) from left to right

11

Put up front soft top

Soft top bow (5) lowers.

12

Install rear seal (1) in clamping channel of right upper main pillar (2) and press in.

13

Put up soft top bow (5)

Front soft top frame fold towards front.

14

Tighten bolts (3) on soft top bow (5)

*BA77.30-P-1007-01A

Soft top

Number

Designation

Model 207.4

Model 209.4

BA77.30-P-1007-01A

Bolt, retaining rail to soft top bow

Nm

5

5

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67

Связанные документы