P68.30-3033-06
1 C-pillar paneling
2 Edge guard
3 Belt guide
4 Seat belt
5 Sheet metal nut
6 Clip
| Remove | ||
1 | Remove rear seat backrest | ||
2 | Press edge guard (2) to side in area of C-pillar paneling (1) | ||
3 | Pull C-pillar paneling (1) toward front, slightly tilt in direction of center of vehicle and remove from C-pillar toward front | ||
4 | Remove belt guide (3) from paneling Unclip C-pillar (1) | ||
5 | Remove seat belt (4) from paneling Remove C-pillar (1) | ||
| Install | ||
6 | Remove sheet metal nut (5) and clip (6) from C-pillar mounts and insert into C-pillar paneling (1) | Sheet metal nut (5) and clip (6) remain in C-pillar mounts when removing C-pillar paneling (1). | |
7 | Pull seat belt (4) in paneling in C-pillar paneling | Do not twist seat belt (4) | |
8 | Clip belt guide (3) into C-pillar paneling (1) | ||
9 | Insert C-pillar paneling (1) with guides (arrows) into rear shelf | Hold C-pillar paneling (1) tilted slightly in direction of center of vehicle | |
10 | Clip C-pillar paneling (1) to C-pillar | C-pillar paneling (1) fit can be adapted by pressing the sheet metal nut (5) into the mount. | |
11 | Install rear seat backrest |