ar6830p4490tx

Remove/install paneling on C-pillar

Type ar · topic 68.30 · version 0100 · 2004-09-06

Applies to: MODEL 219.3

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 219 (models 3**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 219 (models 3**)

AR68.30-P-4490TX

Remove/install paneling on C-pillar

3.8.04

MODEL 219.3

Remove/install paneling on C-pillar

P68.30-3033-06

1 C-pillar paneling

2 Edge guard

3 Belt guide

4 Seat belt

5 Sheet metal nut

6 Clip

Remove

1

Remove rear seat backrest

AR91.12-P-1620TX

2

Press edge guard (2) to side in area of C-pillar paneling (1)

3

Pull C-pillar paneling (1) toward front, slightly tilt in direction of center of vehicle and remove from C-pillar toward front

4

Remove belt guide (3) from paneling

Unclip C-pillar (1)

5

Remove seat belt (4) from paneling

Remove C-pillar (1)

Install

6

Remove sheet metal nut (5) and clip (6) from C-pillar mounts and insert into C-pillar paneling (1)

Sheet metal nut (5) and clip (6) remain in C-pillar mounts when removing C-pillar paneling (1).

7

Pull seat belt (4) in paneling in C-pillar paneling

Do not twist seat belt (4)

8

Clip belt guide (3) into C-pillar paneling (1)

9

Insert C-pillar paneling (1) with guides (arrows) into rear shelf

Hold C-pillar paneling (1) tilted slightly in direction of center of vehicle

10

Clip C-pillar paneling (1) to C-pillar

C-pillar paneling (1) fit can be adapted by pressing the sheet metal nut (5) into the mount.

11

Install rear seat backrest

AR91.12-P-1620TX

Referenced documents