Commercially available tools
Number | Designation | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
L65.20-0087-09
1 Expose spot welds in area A and cut out.
2 Remove corner paneling from taillamp reinforcement.
3 Grind connection points down to bare metal in areas B to J.
4 Drill holes for rivet connections in areas K to N and debur.
Drill rivet holes when components are fitted in vehicle.
5 Grind spot welding flanges down to bare metal on both sides in shaded areas. Coat insides of spot weld flanges with zinc dust paint.
6 Carefully bend corner pillar open in connection areas to D-pillar to facilitate installation.