L62.10-0009-06
1 Fastening nut
2 Windshield washer reservoir
3 Sealant
4 Screws
5 Washers
6 Phillips screws
7 Wheel house
8 Front-end paneling, left-hand
9 Screws
10 Washers
11 Nut
12 Screws
13 Horn
14 Front-end paneling, right-hand
15 Screws
16 Washers
17 Screws
18 Sound deadeners
| Removing, installing | ||
1 | Removing covering below front grille | ||
2 | Removing turn signal indicator | ||
3 | Removing side turn signal indicator | ||
4 | Removing headlamp unit | ||
5.1 | Removing fastening nut for windshield washer reservoir (1) | When left-hand front-end paneling is removed only | |
5.2 | Removing horn (13) | When right-hand front-end paneling is removed only | |
6 | Removing wheelhouse (7) | ||
N | Unscrew fastening nuts for the front-end paneling (4, 9, 11) | ||
8 | Removing front-end paneling (8) | Installation: When replacing the front-end paneling apply MB-permanent underfloor protection, seal with cavity sealing wax after installation. | |
9 | Install in the reverse order | Check gap on engine hood and front doors, adjust if necessary. Refer to | |
Check and adjust gap on engine hood | |||
Check and adjust gap on front doors |